Maytag MDB4621AWW Use and Care Guide - Page 12
Temp Boost, Heated, To turn, the Lock, To turn off the, Delay, Hours, To delay the start, NOTES,
View all Maytag MDB4621AWW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Temp Boost Select this high-temperature option for improved cleaning of heavily soiled dishes. Selecting this option adds heat, water and time to the wash cycle. Heating the water helps improve washing results. NOTE: Temp Boost is an option with Normal Wash and Light Wash. Heated Dry Select this option to dry dishes with heat. Switching off Heated Dry saves energy and is useful when loads contain plastic dinnerware that may be sensitive to high temperatures. The dishes take longer to dry and some spotting can occur. For best drying, use a liquid rinse aid. Some items (such as plastics) may need towel drying. NOTE: Heated Dry is an option with all cycles except Rinse Only. Lock On Use the Lock On to avoid unintended use of the dishwasher. You can also use the lock feature to avoid unintended cycle or option changes during a cycle. When LOCK ON is lit, all buttons are disabled. NOTE: The dishwasher door can be opened while the controls are locked. However, the lock must be turned off and the Start/ Resume button pressed to resume the cycle. To turn on the Lock Press and hold HEATED DRY for 4 seconds. LOCK ON glows. If you press any pad while your dishwasher is locked, the light flashes 3 times. NOTE: If the Heated Dry option is selected, the light will temporarily turn off until Lock On glows. To turn off the Lock Press and hold HEATED DRY for 4 seconds. The light turns off. Delay Hours Select this option to run your dishwasher at a later time or during off-peak hours. You can add items to the load anytime during the delay. After adding items, firmly close the door until it latches and press START/RESUME, or the delay will not continue. To delay the start 1. Press the delay button to choose the number of hours delayed. 2. Select a wash cycle and options. 3. Press START/RESUME. The dishwasher starts the cycle in the selected number of hours. NOTES: • To cancel the delay and cycle, press CANCEL/DRAIN. • To cancel the delay and start the cycle, press START/ RESUME. Follow the progress of your dishwasher with the Cycle Status Indicators. Clean glows when a cycle is finished. The light turns off when you open the door or press CANCEL!DRAIN. ® WASHING ® DRYING • CLEAN Washing Washing glows while the dishwasher is washing or rinsing the dishes. Drying Drying glows while the dishwasher is drying your dishes. Clean Clean glows when a cycle is finished. The light turns off when you open the door or press CANCEL!DRAIN. _,_ During drying, you can see steam escaping through the vent at the upper left corner of the door. This is normal as the heat dries your dishes. IMPORTANT: The vapor is hot. Do not touch the vent during drying. The overfill protection float (in the front right corner of the dishwasher tub) keeps the dishwasher from overfilling. It must be in place for the dishwasher to operate. Check under the float for objects that may keep the protector from moving up or down. 12