Maytag MGDB700VQ Use and Care Guide - Page 10

Choose your exhaust installation type Recommended exhaust installations Typical installations vent the dryer from the rear of the dryer. B F i This dryer can also be exhausted from the rear to either the right or left side. Optional kits for these exhaust installations are needed. Refer to the manufacturer's instructions for kit installation instructions. A B A. Standard rear offset exhaust instaflation B. Rear exhaust insta//ation to the right or left side A. Dryer B. Elbow C. Wall D. Exhaust hood E. Clamps £ Rigid metal or flexible metal vent C. Vent length necessary to connect elbows H. fxhaust out]et Optional exhaust installations Venting systems come in many varieties. Select the type best for your installation. Fire Hazard Cover unused exhaust hole with the following kit: 8212503 Contact your local dealer. Failure to follow these instructions can result in death, fire, electrical shock, or serious injury. This dryer can be converted to exhaust out the bottom. If you prefer; you may contact your local dealer to have the dryer converted. C D c. Bottom exhaust instafltion D. Over-the-top insta//ation (also avai/ab/e with one offset elbow) NOTE: The following kits for close clearance alternate installations Please see the "Assistance or Service" section to order. • Over-the-Top Installation: Part Number 4396028 are available for purchase. • Periscope Installation (For use with dryer vent to wall vent mismatch): Part Number 4396037 - 0" (0 cm) to 18" (45.72 cm) mismatch Part Number 4396011 - 18" (45.72 cm) to 29" (73.66 cm) mismatch Part Number 4396014 - 29" (73.66 cm) to 50" (127 cm) mismatch • Rear exhaust installation to left or right side: Part Number 4396011 • Vent extension: Part Number 8544761 • Bottom Exhaust: Part Number 8212503 |0