Maytag MGDB700VQ Use and Care Guide - Page 19

Timed Dry Use this cycle to complete drying if items are still damp after a Sensor Cycle. Timed Dry is also useful for drying heavyweight and bulky items, such as bedspreads, and work clothes. Lightweight garments, such as exercise wear, can be dried using Timed Dry on a low temperature setting. Timed Dry can also be used with the drying rack. Rapid Dry Use this cycle for dying small loads that need short drying time. Freshen Up Use this cycle to help smooth out wrinkles from such items as clothes packed in suitcases or items wrinkled from being [eft in the dryer to long. Timed Preset Cycle Settings Timed Cycles Load Type Default Temperature Default Time (Minutes) TIMED DRY Regular 40 Heavyweight, bulky items, work clothes RAPID DRY Small loads Regular 23 FRESHEN UP Medium 20 Helps to smooth out wrinkles Sensor Cycle Modifiers Use the DRYNESS LEVEl. button to select dryness levels for the Sensor Cycles. Press DRYNESS I.EVEI. until the desired Dryness setting illuminates. The preset dryness setting is Normal when a Sensor Cycle is selected. You can select a different Dryness I_eve[, depending on your load, by pressing DRYNESS LEVEl_ and choosing More, Normal, Less, or Damp. Selecting More, Normal, I.ess, or Damp automatically adjusts the Dryness I_eve[ at which the dryer will shut off. Once a Dryness I.eve[ is set, it cannot be changed without stopping the cycle. The initial preset temperature is the preferred setting for drying clothes; however, if desired, one alternate temperature may be selected to dry the load on a lower heat setting. Once the alternate temperature has been selected, the next time the same cycle is selected, the alternate temperature is remembered and displayed. The original (default) temperature may be rese[ected. The Delicate cycle does not offer an alternate temperature. Ill damp U less m normal llll more lllvery dry [ ,dryn,ess 1 adjust sensor cycle only NOTE: Dryness I.evel selections cannot be used with the Timed Cycle. Timed Cycle Modifiers Use the TEMP LEVEl_ button to select temperatures for the Timed Cycles. Press TEMP I.EVEI.... until the desired temperature setting illuminates. l[lairfluff Imextraiowmlow mmedium Ireguiar Air Fluff Use the Air Fluff Modifier for items that require drying without heat such as rubbeb plastic, and heat-sensitive fabrics. This table shows examples of items that can be dried using Air Fluff. Type of Load Foam rubber - pillows, padded bras, stuffed toys Plastic - Shower curtains, tablecloths Rubber-backed rugs O[efin, po[ypropy[ene, sheer nylon Time* (Minutes) 20 - 30 20 - 30 40 - 50 10 - 20 *Reset cycle to complete drying, if needed. When using Air Fluff • Check that coverings are securely stitched. • Shake and fluff pillows by hand periodically during the cycle. • Dry item completely. Foam rubber pillows are slow to dry. NOTE: Air Fluff is not available with Sensor Cycles. You can customize your cycles by selecting options. options Drum Light On some models, select I)rum I.ight to turn on the light inside the dryer drum. During a cycle, if Drum I.ight is selected, the drum light turns on and will remain on until DRUM HGHT is pressed again, the door is opened and closed, or the door is [eft open for 5 minutes. When the dryer is not running, the drum light will turn on when DRUM LIGHT is pressed or the dryer door is opened, and it will remain on until the dryer door has been open for 5 minutes, the dryer door is closed, or DRUM I.IGHT is pressed again. Press DRUM I.IGHT at any time to turn the drum light ON or OFF. Wrinkle Prevent Setting The Wrinkle Prevent setting helps keep wrinkles from forming when you cannot unload the dryer promptly at the end of a cycle. During this option, the dryer stops tumbling and then tumbles again for a brief period.