Maytag MGDB700VQ Use and Care Guide - Page 7

Iwarning - dryer

Get Maytag MGDB700VQ - MaytagR BravosR Gas Dryer PDF manuals and user guides
UPC - 883049140582
View all Maytag MGDB700VQ manuals
Add to My Manuals
Save this manual to your list of manuals

Page 7 highlights

120 Volt, 60 Hz., AC only, 15- or 20-amp fused electrical supply is required. A time-delay fuse or circuit breaker is recommended. It is also recommended that a separate circuit serving only this dryer be provided. GROUNDING INSTRUCTIONS I For a grounded, cord-connected dryer: This dryer must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This dryer is equipped with a cord having an equipmentgrounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. WARNING: Improper connection of the equipment- grounding conductor can result in a risk of electric shock. Check with a qualified electrician or service representative or personnel if you are in doubt as to whether the dryer is properly grounded. Do not modify the plug provided with the dryer: if it will not fit the outlet, have a proper outlet installed by a qualified electrician. SAVE THESE INSTRUCTIONS Explosion Hazard Use a new CSA International approved gas supply line. Install a shut-off valve. Securely tighten all gas connections. If connected to LP, have a qualified person make sure gas pressure does not exceed 13" (33 cm) water column. Examples of a qualified person include: licensed heating personnel, authorized gas company personnel, and authorized service personnel. Failure to do so can result in death, explosion, or fire. Gas Type Natural Gas: This dryer is equipped for use with Natural gas. It is design-certified I.P (propane or butane) gases with appropriate conversion. by CSA International for • Your dryer must have the correct burner for the type of gas in your home. Burner information is located on the rating plate in the door well of your dryer. If this information does not agree with the type of gas available, contact your dealer or call the phone numbers referenced on the front page of this manual. LP gas conversion: Conversion must be made by a qualified technician. No attempt shall be made to convert the appliance from the gas specified on the model/serial rating plate for use with a different gas without consulting your gas company. For information on ordering an [.P conversion kit, please refer to the "Assistance or Service" section. Ask for Part Number 49572. Gas Supply Line: • Must include VJ' N PT minimum plugged tapping accessible for test gauge connection, immediately upstream of the gas connection to the dryer (see illustration). • W' IPS pipe is recommended.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
120
Volt,
60
Hz.,
AC only,
15- or 20-amp
fused
electrical
supply
is required.
A time-delay
fuse or circuit
breaker
is recommended.
It is also
recommended
that
a separate
circuit
serving
only
this
dryer
be provided.
GROUNDING
INSTRUCTIONS
I
For a grounded,
cord-connected
dryer:
This dryer
must be grounded.
In the event of malfunction
or
breakdown,
grounding
will reduce the risk of electric shock
by providing
a path of least resistance
for electric current.
This dryer
is equipped
with a cord having an equipment-
grounding
conductor
and a grounding
plug. The plug must
be plugged
into an appropriate
outlet that is properly
installed
and grounded
in accordance
with all local codes
and ordinances.
WARNING:
Improper
connection
of the equipment-
grounding
conductor
can result in a risk of electric shock.
Check with a qualified
electrician
or service
representative
or personnel
if you are in doubt as to whether the dryer is
properly
grounded.
Do not modify the plug provided
with the
dryer: if it will not fit the outlet, have a proper
outlet installed
by a qualified
electrician.
SAVE
THESE
INSTRUCTIONS
Explosion
Hazard
Use a
new
CSA International
approved
gas supply
line.
Install
a shut-off
valve.
Securely
tighten
all gas connections.
If connected
to LP,
have
a qualified
person
make
sure
gas pressure
does
not exceed
13" (33 cm) water
column.
Examples
of a qualified
person
include:
licensed
heating
personnel,
authorized
gas company
personnel,
and
authorized
service
personnel.
Failure
to
do
so can result
in
death, explosion,
or fire.
Gas
Type
Natural
Gas:
This
dryer
is equipped
for
use with
Natural
gas. It is design-certified
by CSA International
for
I.P (propane
or butane)
gases with
appropriate
conversion.
•
Your
dryer
must
have the
correct
burner
for the
type
of gas in your
home.
Burner
information
is located
on the
rating
plate
in the
door
well
of your
dryer.
If this
information
does not
agree
with
the type
of gas available,
contact
your
dealer
or call
the
phone
numbers
referenced
on the
front
page
of this
manual.
LP
gas
conversion:
Conversion
must
be
made
by a qualified
technician.
No
attempt
shall
be made
to convert
the
appliance
from
the gas specified
on the
model/serial
rating
plate
for use with
a different
gas without
consulting
your
gas company.
For information
on
ordering
an [.P conversion
kit,
please
refer
to the
"Assistance
or Service"
section.
Ask for
Part Number
49572.
Gas Supply
Line:
•
Must include
VJ' N PT minimum
plugged tapping accessible for test gauge connection,
immediately
upstream of the gas connection
to the dryer (see illustration).
•
W' IPS pipe is recommended.