McAfee IIP-M65K-ISAA Product Manual - Page 11
Ports, One RJ-45 10/100/1000 Management port, One RS-232C Console port, One RS-232C Auxiliary port
View all McAfee IIP-M65K-ISAA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
McAfee® IntruShield® IPS 4.1 M-6050 Sensor Product Guide Overview M-6050 physical description dull-duplex Ethernet segments or eight 1 Gigabit SPAN ports transmitting aggregated traffic. Ports The M-6050 is a 2RU unit and is equipped with the following components: Figure 2: M-6050 sensor Name 1 2 3 4 5 6 7 8 9 10 Management port Description Console port Auxiliary port SFP Gigabit Ethernet Monitoring ports XFP Gigabit Ethernet Monitoring ports Response port Fail-Open Control ports External Compact Flash port Power Supply A Power Supply B 1 One RJ-45 10/100/1000 Management port, which is used for communication with the Manager server. You can assign an IP address to this port during installation. 2 One RS-232C Console port, which is used to set up and configure the sensor. 3 One RS-232C Auxiliary port, which may be used to dial in remotely to set up and configure the sensor. 4 Eight small form-factor pluggable (SFP) 1 Gigabit Monitoring ports, which enable you to monitor eight SPAN ports, four full-duplex tapped segments, four segments inline, or a combination (that is, two full-duplex segment, four SPAN ports). The Monitoring interfaces of the M-6050 work in stealth mode, meaning they have no IP address and are not visible on the monitored segment. 3