McAfee IIP-M65K-ISAA Product Manual - Page 17
Unpacking the sensor, Pull out the packing material surrounding the sensor.
View all McAfee IIP-M65K-ISAA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
McAfee® IntruShield® IPS 4.1 M-6050 Sensor Product Guide Before You Install Unpacking the sensor Unpacking the sensor To unpack the sensor: 1 Place the sensor box as close to the installation site as possible. 2 Position the box with the text upright. 3 Open the top flaps of the box. 4 Remove the accessory box. 5 Verify you have received all parts. These parts are listed on the packing list and in Contents of the sensor box. 6 Pull out the packing material surrounding the sensor. 7 Remove the sensor from the anti-static bag. 8 Save the box and packing materials for later use in case you need to move or ship the sensor. 9
McAfee® IntruShield® IPS 4.1
Before You Install
M-6050 Sensor Product Guide
Unpacking the sensor
Unpacking the sensor
To unpack the sensor:
1
Place the sensor box as close to the installation site as possible.
2
Position the box with the text upright.
3
Open the top flaps of the box.
4
Remove the accessory box.
5
Verify you have received all parts. These parts are listed on the packing list and
in Contents of the sensor box.
6
Pull out the packing material surrounding the sensor.
7
Remove the sensor from the anti-static bag.
8
Save the box and packing materials for later use in case you need to move or
ship the sensor.
9