Netgear MS2110-100NAS STORA User Manual - Page 26
To Replace the Disk, To Check Disk Status or Rebuild a Disk
View all Netgear MS2110-100NAS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
NETGEAR Stora User Manual To Replace the Disk 1. View the disk status lights to identify which disk has failed. If necessary, unlock the tray lock by moving it to the right, then press the release of the failed disk. The latch pops out. 2. Pull out the disk, and replace the failed disk. 3. Slide the disk tray back into the unit and secure the latch. Figure 18 Disk Release Latch Note: To protect against data loss, add a second disk to your Stora to be used as a mirrored backup of the data on the first disk. To Check Disk Status or Rebuild a Disk 1. Open Stora application user interface. 2. Click Preferences. 3. Navigate to Administration > Disk Management and locate the Rebuild button. a. If a rebuild button shows on the screen, click it to find the status of the disk. b. If no rebuild button shows on the screen, the disk is working properly. 4. If the disk is bad, replace it. See "Disk Management" on page 106 for more information. Figure 19 Rebuild a Disk 26 | Chapter 1: Getting Acquainted