Netgear MS2110-100NAS STORA User Manual - Page 41
To add a printer - PC, Stora Agent, NETGEAR Stora User Manual
View all Netgear MS2110-100NAS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
NETGEAR Stora User Manual Note: Currently multiple printers are not supported. If you have a multi-function printer, scanning is not supported Optionally, you can also use a powered hub to expand the USB port to support a single printer and multiple USB drives. To add a printer - PC 1. Connect a USB cable from the printer to the Stora-enabled device, or to a USB hub connected to the device. 2. Log in to the Stora and go to Explore my Stora folders on the Agent. . 3. Double-click the Stora printer icon. The following message appears. 4. Click OK. Note: The Stora icon will only appear if a printer is attached to the USB drive of your Stora. 5. If you receive the following message, click OK. Chapter 2: Stora Agent | 41
Chapter 2:
Stora Agent
|
41
NETGEAR Stora User Manual
Note:
Currently multiple printers are not supported. If you have a
multi-function printer, scanning is not supported
Optionally, you can also use a powered hub to expand the USB port to support a single
printer and multiple USB drives.
To add a printer - PC
1.
Connect a USB cable from the printer to the Stora-enabled device, or to a USB hub
connected to the device.
2.
Log in to the Stora and go to Explore my Stora folders on the Agent.
.
3.
Double-click the Stora printer icon. The following message appears.
4.
Click OK.
Note:
The Stora icon will only appear if a printer is attached to the USB
drive of your Stora.
5.
If you receive the following message, click OK.