Netgear WFS709TP WFS709TP Setup Manual - Page 55
Enter the antenna gain in dBi for example, enter 5.0. This information is mandatory, as
UPC - 606449052336
View all Netgear WFS709TP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
WFS709TP ProSafe Smart Wireless Switch Software Administration Manual Figure 2-14 2. Select the AP that is to be configured from the list by selecting the checkbox to the left of the AP and then clicking the Provision button. Figure 2-15 3. On the Provision page (Figure 2-15), enter the location code in the format explained at the beginning of this section. 4. Enter the antenna gain in dBi (for example, enter 5.0). This information is mandatory, as the AP cannot bring up its radio interface or function as an AP without it. 5. Click Apply and Reboot to apply the configuration to the AP. Note: The configuration does not take effect until the AP is rebooted Deploying a Basic WFS709TP System v1.0, June 2007 2-19
WFS709TP ProSafe Smart Wireless Switch Software Administration Manual
Deploying a Basic WFS709TP System
2-19
v1.0, June 2007
2.
Select the AP that is to be configured from the list by selecting the checkbox to the left of the
AP and then clicking the Provision button.
3.
On the Provision page (
Figure 2-15
), enter the location code in the format explained at the
beginning of this section.
4.
Enter the antenna gain in dBi (for example, enter 5.0). This information is mandatory, as the
AP cannot bring up its radio interface or function as an AP without it.
5.
Click Apply and Reboot to apply the configuration to the AP.
Figure 2-14
Figure 2-15
Note:
The configuration does not take effect until the AP is rebooted