Netgear WFS709TP WFS709TP Setup Manual - Page 58
Assigning a Static Address to a VLAN, On the Add New VLAN screen
UPC - 606449052336
View all Netgear WFS709TP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
WFS709TP ProSafe Smart Wireless Switch Software Administration Manual 3. On the Add New VLAN screen (Figure 3-1), enter the VLAN ID. Figure 3-1 4. To add physical ports to the VLAN, click Add in the VLAN Members section, then select the port to add to the VLAN. • You can specify whether the port uses 802.1q tagging. • For ports that use 802.1q tagging, you can also specify whether the VLAN is the native VLAN for the port (frames on the native VLAN are not tagged). 5. Click Add. 6. Click Apply. Assigning a Static Address to a VLAN To assign a static IP address to a VLAN: 1. Navigate to the Configuration > Basic > Network > IP Interfaces page on the browser interface (Figure 3-2). 2. Click Edit for the VLAN you just added. 3-2 Configuring Network Parameters v1.0, June 2007