Netgear WNDR4000 User Manual - Page 14
The 2.4 GHz N/G-Band LED is on, LEDs 1 through 4 are lit for any computers cabled to the wireless - n750 dual band
UPC - 606449077629
View all Netgear WNDR4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
N750 Wireless Dual Band Gigabit Router WNDR4000 User Manual • The 2.4 GHz N/G-Band LED is on, and the 5.0 GHz N-Band LED is on. • The Internet LED is on. If it is not, make sure that the Ethernet cable is securely attached to the wireless router Internet port and the modem, and that the modem is powered on. Verify that the LAN LEDs (1 through 4) are lit for any computers cabled to the wireless router by an Ethernet cable. 14 | Chapter 1. Hardware Setup
14
|
Chapter 1.
Hardware Setup
N750 Wireless Dual Band Gigabit Router WNDR4000 User Manual
•
The 2.4 GHz N/G-Band LED is on, and the 5.0 GHz N-Band LED is on.
•
The Internet LED is on. If it is not, make sure that the Ethernet cable is securely
attached to the wireless router Internet port and the modem, and that the modem is
powered on.
Verify that the LAN
LEDs (1 through 4) are lit for any computers cabled to the wireless
router by an Ethernet cable.