Netgear WNDR4000 User Manual - Page 81
IPv6, Traffic Meter, Advanced > IPv6, Apply, 6to24 Tunnel, Pass Through - update
UPC - 606449077629
View all Netgear WNDR4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
N750 Wireless Dual Band Gigabit Router WNDR4000 User Manual IPv6 The IPv6 feature allows you to configure and check the status of your IPv6 Internet connection. Select Advanced > IPv6, and the following screen displays: The default setting is Disabled, which turns off the IPv6 function. To turn it on, select your connection type from the Internet Connection Type list and click Apply. • If your ISP did not specify the connection type, you can select 6to24 Tunnel. • If your ISP explicitly indicates that your IPv6 connection is not DHCP, PPPoE, or Fixed IP, or your ISP indicates that it is IPv6 auto config, you can select Pass Through. • If you are not sure about the IPv6 connection, you can use the Setup Wizard to automatically detect your Internet connection type. Traffic Meter Traffic metering allows you to monitor the volume of Internet traffic passing through your wireless router's Internet port. With the Traffic Meter utility, you can set limits for traffic volume, set a monthly limit, and get a live update of traffic usage. Chapter 7. Advanced Settings | 81