Nikon B0012OGF6Q D60 User's Manual - Page 193

Specifications Lens Compatible lenses Shutter Type Speed Flash sync speed Release Release mode Frame advance rate Self-timer Exposure Metering Metering method Range (ISO 100, f/1.4 lens, 20°C/68°F) Exposure meter coupling • AF-S and AF-I NIKKOR: All functions supported • Type G or D AF NIKKOR not equipped with an autofocus motor: All functions supported except autofocus. • Non-Type G or D AF NIKKOR not equipped with an autofocus motor: All functions supported except 3D color matrix metering II and autofocus. • IX-NIKKOR and AF-NIKKOR for F3AF: Not supported. • Type D PC NIKKOR: All functions supported except some shooting modes. • AI-P NIKKOR: All functions supported except 3D color matrix metering II • Non-CPU: Autofocus not supported. Can be used in exposure mode d, but exposure meter does not function. • Lens with maximum aperture of f/5.6 or faster: Electronic rangefinder can be used. Electronically-controlled vertical-travel focal-plane shutter 1/4000-30 s in steps of 1/3 EV, Bulb, Time (optional Wireless Remote Control ML-L3 required) X=1/200 s; synchronizes with shutter at 1/200 s or slower Single frame, Continuous Self-timer, Remote control (optional Wireless Remote Control ML-L3 required) Up to 3 fps (by selecting Manual focus mode, rotating the mode dial to Shutter-priority auto or Manual mode, selecting a shutter speed of 1/250s or faster, and using defaults for all other settings). Can be selected from 2, 5, 10, and 20 s duration TTL exposure metering using 420-segment RGB sensor • Matrix: 3D color matrix metering II (type G and D lenses); color matrix metering II (other CPU lenses) • Center-weighted: Weight of 75 % given to 8-mm circle in center of frame • Spot: Meters 3.5-mm circle (about 2.5 % of frame) centered on selected focus point (on center focus point when non-CPU lens is used) • Matrix or center-weighted metering: 0-20 EV • Spot metering: 2-20 EV Combined CPU Technical Notes 181