Nikon COOLPIX S6100 User Manual - Page 191
Error Messages
View all Nikon COOLPIX S6100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 191 highlights
Error Messages The following table lists the error messages and other warnings displayed in the monitor, as well as the solutions for dealing with them. Display O (blinks) N Battery exhausted. Description Clock not set. Battery exhausted. P Battery temperature high Battery temperature is high. Q (● blinks red) Camera cannot focus. P Please wait for the camera to finish recording. u Memory card is write protected. P This card cannot be used. P This card cannot be read. Camera cannot perform other operations until saving is complete. Write-protect switch is in "lock" position. Error accessing memory card. Solution A Set date and time. 152 Charge or replace the battery. 16, 18 Turn off camera, and allow battery to cool down before resuming use. After five seconds, this message will disappear, the monitor will turn off, and the power-on lamp will blink 21 rapidly. After the lamps blink for three minutes, the camera will turn off automatically. Pressing the power switch also turns off the camera. • Refocus. • Focus on another subject positioned at the same distance from the camera as the intended subject. 30, 31 54 Wait until message clears from display automatically - when saving is complete. Slide write-protect switch to "write" position. 25 • Use approved card. 177 • Check that connectors 24 are clean. • Confirm that memory 24 card is correctly inserted. Technical Notes and Index 179