Nikon Coolpix L11 L10 / L11 User's Manual - Page 126
Manager Windows only., Electronically Controlled Cameras
UPC - 018208255726
View all Nikon Coolpix L11 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 126 highlights
116 Problem Cause/Solution c Transfer marking does Pictures were marked for transfer not appear using another model of camera. Select pictures for transfer using the - same model that initially took the pictures. PictureProject does not • Camera is off. 10 start when camera is con- • Batteries are exhausted. 16 nected • USB cable is not correctly connected. 61 • Appropriate [USB] option is not 59, 60 selected. • Camera is not registered in Device - Manager (Windows only). See the PictureProject reference manual (on CD) for further information. • Computer is not set to launch Pic- - tureProject automatically. Pictures not displayed on television Choose correct video mode. 58 Memory card contains no pictures. 14 Replace memory card. Remove mem- ory card to play back pictures from internal memory. Technical Notes Pictures to be printed or Memory card contains no pictures. transferred are not displayed Replace memory card. Remove memory card to print or transfer pictures - from internal memory. Cannot select paper size Paper size cannot be selected from from camera the camera if the printer does not support the page sizes used by the camera or the printer automatically - selects the page size. Use the printer to select page size. j Electronically Controlled Cameras In extremely rare instances, unusual characters may appear in the monitor and the camera may stop functioning. In most cases, this phenomenon is caused by a strong external static charge. Turn the camera off, remove and replace the batteries, and then turn the camera on again. In the event of continued malfunction, contact your retailer or Nikon representative. Note that disconnecting the power source as described above may result in the loss of any data not recorded to internal memory or the memory card at the time the problem occurred. Data already recorded will not be affected.