Nikon F75D Instruction Manual - Page 38

CUSTOM SETTING Menu/Features of Custom Setting-continued • Menu number and Custom Setting options * Refer also to the Custom Setting Menu table at the end of this instruction manual. 1. Beep sound (pages 28, 41, 84) Options: 0: Activated (initial setting) 1: Disabled At initial setting, beep sound is emitted when focus is achieved in autofocus, during self-timer or two-sec. remote control operation. This beep sound can be turned off with option 1 in this menu. 2. Warning indications in the viewfinder (pages 9, 17, 21, 31, 78) Options: 0: Displayed (initial setting) 1: Off At initial setting, when battery power is low, no film is loaded, or film is not loaded properly, warning indications such as m or œ appear in the viewfinder. However, these warning indications can be turned off. 3. Bracketing order (page 67) Options: 0: Metered value, under, over (initial setting) 1: Under, metered value, over Bracketing is normally performed in the order of the initial setting. However, this Bracketing order can be changed to be performed from negative compensation to positive compensation. 4. Focus area illumination (page 9) Options: 0: Automatically illuminated for low light (initial setting) 1: Cancelled 2: Always illuminated At initial setting, selected focus area (focus brackets) in the viewfinder is temporarily illuminated in red depending on the subject brightness for easy identification. However, it can be set not to be illuminated or always illuminated regardless of the subject brightness. 5. Auto Exposure Lock when shutter release button is lightly pressed (page 80) Options: 0: Disabled (initial setting) 1: Activated At initial setting, Auto Exposure Lock can be performed by pressing the x button. However, Auto Exposure can be set to be locked by lightly pressing the shutter release button. 6. AE-L button (pages 52/80) Options 0: Auto Exposure lock only (initial setting) 1: AE/AF simultaneous lock 2: AF operation only starts by pressing x button At initial setting, only Auto Exposure is locked when the x button is pressed. However, Auto Exposure and autofocus can be set to be locked simultaneously. Also at initial setting, autofocusing starts when the shutter release button is lightly pressed, but it can be set to activate when the x button is pressed. (In this setting, pressing the shutter release button lightly does not start autofocusing.) 7. Metering system in the Auto Exposure lock (page 80) Options: 0: Centre-Weighted (initial setting) 1: Matrix 2: Spot At initial setting, the exposure metering system automatically changes to CentreWeighted Metering when Auto Exposure lock is performed. However, it can be set to Matrix or Spot Metering. 8. Time delay for auto meter-switch-off (page 17) Options 3 : 3 sec. 5 : 5 sec. (initial setting) 10 : 10 sec. 20 : 20 sec. Note that the usable number of film rolls per batteries decreases with the longer delay time for auto meter-switch-off since it consumes more power. 74 www.mynikon.com.pl 75