Nikon F75D Instruction Manual - Page 64

Specifications-continued Auto Exposure Bracketing Bracketing range: ±2 EV; number of shots: three; bracketing steps: 0.5, 1, 1.5 or 2 EV (except in a or Vari-Program) Film speed setting • Automatically set to ISO film speed of DX-coded film in use (manual not selectable) • Film speed range: DX: ISO 25-5000, automatically set to ISO 100 with non-DX-coded film Shutter Electronically controlled vertical-travel focal-plane shutter Shutter speeds • In a, s, d, f, g, h, P, A: Automatically set between 30 and 1/2000 sec. • In S: 30 to 1/2000 sec. (in 1/2 steps) • In M: 30 to 1/2000 sec. (in 1/2 steps), Time Sync contact X-contact only; flash synchronisation up to 1/90 sec. Built-in Speedlight • In a, Vari-Program (except in d or g) Automatically activated • In P, S, A, M: Activated by pressing flash lock-release button Guide number: 12 (at ISO 100, m); flash coverage: 28mm or longer lens; film speed range: ISO 25 to ISO 800 Flash control Controlled by TTL Sensor • Automatic Balanced Fill-Flash with TTL Multi Sensor: 3D Multi- Sensor Balanced Fill-Flash compatible with built-in Speedlight or optional Speedlight and D- or G-type Nikkor lens, Multi-Sensor Balanced Fill-Flash compatible with built-in Speedlight or optional Speedlight and CPU Nikkor lens other than D/G-type (except in Manual exposure mode) • Standard TTL: in Manual exposure mode • Film speed range in TTL auto flash: ISO 25 to 800 * See pages 90-91 and 107-111 for details. Flash sync mode Front-Curtain Sync (normal sync), Slow Sync, Rear-Curtain Sync, Red-Eye Reduction, Red-Eye Reduction with Slow Sync, Flash Cancel Ready-light • Flash fully charged: ready-light lights • Full output warning: ready-light blinks Flash recommended Blinks when the subject is dark or backlit and Speedlight is indication recommended in P, S, A and M Accessory shoe Standard ISO-type hot-shoe contact (sync contact, ready-light contact, TTL Auto Flash contact, GND), safety lock provided 126 Self-timer Electronically controlled; timer duration: 10 sec. Remote control (optional) Infrared, activated by pressing the shutter release button; immediate release mode and 2-sec. delay mode; operating distance: approx. 5m directly in front of the camera; battery: one 3V CR2025 lithium battery; battery life: approx. 5 years (may differ with usage amount or other operating conditions); dimensions: approx. 60 x 28 x 7mm (W x H x D); weight: approx. 10g including battery Depth-of-field preview button Stop-down lens aperture by pressing depth-of-field button; electronically controlled Film loading Easy loading, automatic prewind with built-in motor; film automatically advances to first frame (frame of the maximum number of available exposure) when camera back is closed Film advance • Automatic advance with built-in motor • ı: Single-frame shooting, ˜: Continuous shooting • Film advance speed: approx. 1.5 fps (fresh batteries) Film rewind • Automatic rewind with built-in motor • Mid-roll rewind available Multiple exposure Selectable in P, S, A, M LCD panel information Shutter speed, aperture, exposure compensation, exposure compensation value, auto exposure bracketing, multiple exposure, flash sync mode, focus area, battery power, frame counter, self-timer, remote control Date/time imprint function (F75D only) Built-in clock: 24-hour type with timing accuracy within ±90 seconds a month; leap year adjustment until December 31, 2049 Usable film: ISO 32 to 3200 DX-coded film Display mode: Year/Month/Day, Day/Hour/Minute, No Imprint, Month/Day/Year and Day/Month/Year Camera back Hinged back with film confirmation window F75D: data imprint LCD panel/buttons Power source Two 3V CR2 lithium batteries Power switch Power ON and OFF position Exposure meter Auto meter shut-off 5 sec. after power turned on if no operations are performed; activated by lightly pressing shutter release button after power is turned on www.mynikon.com.pl 127 MISCELLANEOUS