Oki C7200 Service Manual - Page 247

Service Guide - C7000 Series Chapter 4 Adjustments Page: 110 4.1.3 CRM board adjustments Destination Setting: The CRM board, a main board, is a common ROM among destinations. When using the board for maintenance, its destination must be set using the system maintenance mode. Placing Printer in System Maintenance Mode: (Not on view of users) 1. While holding the (2) and (6) keys down, turn the power on. 2. Continue to press the (3) and (7) keys to select a value to be set, and press SELECT to fix the value. Set Values and Destinations Set Value ODA Destination ODA Remark LETTER inch OEL OEL A4 millimeter APS APS A4 JP1 Japan A4 millimeter JPOEM Japan OEM A4 millimeter OEMA OEM OEML OEM Model Name Setting: The CU program automatically determines and switches between following printer specifications (LED head width, LED head resolution, presence or absence of Japanese fonts (Heisei fonts, Morisawa fonts)). With Kanji fonts Without Kanji fonts LED Head Width Resolution Two Heisei fonts Five Morisawa fonts ODA / OEL / ASP A4 600 dpi ML3010c OKI C7200 1200 dpi / / OKI C7400 A3 600 dpi ML3020c / OKI C9200 1200 dpi ML3050c / OKI C9400 EEPROM Initialization To initialize the EEPROM, enter the maintenance mode and select the EEPROM RESET item after the general start-up. 4.1.3.1 Short plug settings 4.1.3.2 Printings singly using controller-equipped printer Copyright 1999, Okidata, Division of OKI America, Inc. All rights reserved.