Onkyo TX SR501 Owner Manual - Page 41

Using the Remote Controller RC-518M with Your Other AV Components RC-518M (North America only) Connecting your -compatible Onkyo CD player, DVD player, or cassette recorder to the TX-SR501 via allows you to control your system with the TX-SR501's remote controller by pointing it at the TX-SR501. This allows you to control components that are out of sight, for example, in a cabinet. Since you don't have to enter any special codes, or do any programming, allows you to control these components quickly and easily. See page 19 for connection information. See page 42 for operating information. In addition, you can control an AV component made by another manufacturer by entering the appropriate manufacturer's code into the remote controller. Note: • To use the function, you must make an connection and an analog RCA/phono connection between the AV component and your TX-SR501, even if they are connected digitally. Entering the Manufacturer's Code If you're using an Onkyo CD player connected to the TX-SR501's connector, an Onkyo AV component without an connection, or an AV component made by another manufacturer, do the following. 1 Determine the appropriate manufacturer's code from the following list. Where several codes are listed, try the first one, and if that doesn't work, try the others until you find one that does. 2 While holding down the remote controller's [VCR], [TV], [CABLE/SAT], or [CD/DVD] button, press the [ENT] button. For the [CD/DVD] button, you can enter a CD code or DVD code, not both. And for the [CABLE/SAT] button, a Cable code or Satellite code, not both. 3 Within 10 seconds, use the remote controller's number buttons to enter the manufacturer's code. 4 Check to see if you can control the AV component from the remote controller. If it works as expected, the code has been entered correctly. If not, go back to step 3 and try again. Note that with some manufacturer's AV components, some of the remote controller's buttons may not work as expected. By default, the [CD/DVD] button is set to code 316, which is for use with an -compatible Onkyo DVD player connected to the TX-SR501's connector. To control an -compatible Onkyo CD player connected to the TX-SR501's connector, you must enter code 300. To control an Onkyo DVD player without an connection, you must enter either code 301 or 313. The [CD/DVD] button can be used with only one AV component. Manufacturer AIWA AKAI DENON ECHOSTAR EMERSON FISHER GE GE • PANA GE • RCA GEMINI GENERAL INSTRUMENT G.I. GO VIDEO GOLD STAR HAMLIN HITACHI HUGHES NETWORK SYSTEM TV VCR 137 227 228 200 201, 202 203 100, 101, 102, 140 103, 104 204, 205 105, 106, 107 108 206, 207 103, 109 JERROLD JVC KENWOOD MACOM MAGNAVOX MARANTZ MITSUBISHI NEC OAK 208 110, 111, 112, 113 209, 210 211 114, 115, 116 117, 118, 119, 120, 121, 139 136 ONKYO PANASONIC PHILIPS PIONEER PRIMESTAR PROSCAN RCA S.ATLANTA SAMSUNG SHARP SHINTOM SONY TOCOM TOSHIBA YAMAHA ZENITH 212, 213 214 215 122, 123 114 216 217, 218, 219, 220, 229, 230 109 221, 222 223 224 124, 125, 126 127, 128 138 129, 130, 131, 132, 133, 141 134 225, 226 135 DVD 302 303 304 305 306 307 308 301, 313, 316 (for DVD), 300 (for CD) 309 310 311 311 304 312 313 314 315 Cable 401 400 402, 403, 404, 405 406, 407, 408, 409, 410, 411, 412, 413, 414 415, 416, 417 418 419, 420, 421 422, 423 424, 425, 426, 427, 428, 429 430, 431 432, 433, 434 435 436 437, 438 Satellite 500 501 502 503 504, 505, 506 507 508, 509, 510 508, 509, 510 511 512 41