Onkyo TX SR501 Owner Manual - Page 47
The Late Night function - reset
UPC - 751398005213
View all Onkyo TX SR501 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Troubleshooting-Continued Tuner Symptom Possible cause Remedy Use the [FM MODE] button to select mono mode (page 31). Reception is noisy, intermittent, and the FM STEREO indicator flashes? You're too far away from the transmitter. Or, your FM antenna is in the wrong position or pointing in the wrong direction. Or, the station's signal strength is poor. Adjust the position, height, and direction of your FM antenna. Install an outdoor FM antenna, preferably one with many elements. Installing an outdoor antenna is a specialist job, so contact your nearest dealer for advice (page 23). Install an outdoor antenna as far away as possible from nearby roads. Reception is hindered by a Interference is being caused by fluorescent Adjust the position or direction of your outdoor crackling noise? lights being turned on or off or by passing cars. antenna. Move your antenna as far away as possible from fluorescent lights. AM reception is hindered by a buzzing noise, especially at night or with weak signals? Interference caused by electrical equipment, including fluorescent lights. Relocate your AM antenna. Install an outdoor AM antenna (page 23). AM reception is hindered by a high-pitched noise? Interference caused by your TV. Move the AM loop antenna as far away as possible from your TV. Move the TX-SR501/TX-SR501E as far away as possible from your TV. FM reception and stereo separation are poor even though the TUNING and FM STEREO indicators are shown. Tall buildings, mountains, or hills are causing wave reflections that interfere with the main signal. Try an FM antenna with better directionality. The tuner presets no longer work? The power cord has not been connected to a wall outlet, or the power has been turned off for an extended period. Preset your favorite radio stations again (page 31). The power cord must be plugged into a wall outlet a few times each month in order to preserve the presets. You cannot record from an AV component that Connect the AV component using analog connections is connected digitally. (pages 10-19). Sound can be heard from the speakers, but it cannot be recorded? You're playing Dolby Digital or DTS source material. Although you cannot record Dolby Digital or DTS surround channels, you can record the left and right channels by connecting the source AV component's analog left and right outputs to a pair of analog inputs on the TX-SR501/TX-SR501E. The wrong input source is selected on your recorder. Select the correct input source. See your recorder's manual for more information. The Late Night function doesn't work? The Late Night function only works with Dolby " DIGITAL" appears on the display when using a Digital. Dolby Digital source (page 28). The input signal format is set to Auto or Analog. Set the input signal format to Multich (page 29). The multi-channel inputs don't work? The AV component is not properly connected. Connect the AV component's 5.1 channel outputs to the TX-SR501/TX-SR501E's DVD IN FRONT L and R, SURR L and R, CENTER, and SUBWOOFER connectors (page 13). The listening mode changes This is normal. When you connect a pair of to Stereo when headphones headphones, the Stereo listening mode is are connected? selected automatically. Recording Others • The TX-SR501/TX-SR501E contains a microcomputer for signal processing and control functions. In very rare situations, severe interference, noise from an external source, or static electricity may cause it to lockup. In the unlikely even that this should happen, unplug the power cord from the wall outlet, wait at least five seconds, and then plug it back in again. That should fix it. • To reset the TX-SR501/TX-SR501E to its factory defaults, turn it on and, while holding down the [VIDEO 1] button, press the [STANDBY/ON] button. "Clear" will appear on the display and the TX-SR501/TX-SR501E will enter Standby mode. 47