Onkyo TX-SV444 Owner Manual - Page 9

Video equipment connections IPM (Intelligent Power Management) System To use the IPM function, you must connect the audio output of a monitor TV to the TV/AUX jacks and press the TV/AUX button on the input selector. "TV" or "AUX" will be shown on the display. Then, press the TV/AUX button until "IPM ON" appears on the display. If "IPM OFF" is shown on the display, the IPM function cannot be used in this situation. When the TV is switched on, this receiver also switches on automatically and the input selector is set to TV. Provided that the input selector remains set to TV, the receiver will automatically switch off five minutes after the TV is switched off. Monitor TV E AUDIO OUT rVIDEO IN MA.11{11.11 0 0 z O0 O O141,,I1 :6) 0 :§) 0 REAP PP EPS 10 0 [0 • This receiver will automatically switch on approximately three to five seconds after the TV comes on. • If a mono TV is used, connect the audio output of the TV to the TV/AUX "L" jack. I DVD 5.1 CH PLAYER DVD Player 000 VIDEO OUT FRONT OUT SURROUND OUT SUBWOOFER OUT CENTER OUT GI 0 O6O 000 0,000)8 PEP P - L O1.43KV6 00 I0 , ) _2 © I )0 • When using a DVD player connected to the MULTI-CH INPUT jacks, set the SPEAKERS A button on the front panel to ON and set the SPEAKERS B button to OFF. 9