Home » Panasonic Manuals » Video Cameras » Panasonic Handheld P2 HD Camcorder with AVC-ULTRA Recording » Manual Viewer

Panasonic Handheld P2 HD Camcorder with AVC-ULTRA Recording Operating Instruct - Page 126

[SW MODE], Description of settings, 24dB], [30dB], Ach], [Bch], [PRE], [OFF], FAST], [NORMAL], [SLOW]

View all Panasonic Handheld P2 HD Camcorder with AVC-ULTRA Recording manuals

Add to My Manuals
Save this manual to your list of manuals

Page 126 highlights

Chapter 6 Menu Operations - Menu list [SW MODE] Configure the settings of each mode when switched using each switch. These menu items cannot be set when the thumbnail screen is displayed. [LOW GAIN] Item [MID GAIN] [HIGH GAIN] [SUPER GAIN] [OIS] [ATW] [ATW SPEED] [ATW TARGET R] [ATW TARGET B] [W.BAL PRESET] [W.BAL VAR] [H.ZOOM SPEED] [PUSH AF MODE] [MF ASSIST] [FOCUS ASSIST MODE] [MACRO] [MACRO MODE] Description of settings Sets the gain value to be assigned to the position of the switch. (Negative value of gain is only in [HIGH SENS.] mode.) [−3dB]...[18dB] ffFactory setting: [0dB] Sets the gain value to be assigned to the position of the switch. (Negative value of gain is only in [HIGH SENS.] mode.) [−3dB]...[18dB] ffFactory setting: [6dB] Sets the gain value to be assigned to the position of the switch. (Negative value of gain is only in [HIGH SENS.] mode.) [−3dB]...[18dB] ffFactory setting: [12dB] Sets the super gain to be assigned to the USER button. [24dB], [30dB], [36dB] [ALL]: Each time the USER button is pressed, the camera toggles [24dB] → [30dB] → [36dB] → (off) in order. ffFactory setting: [36dB] Enables/disables the image stabilizer function. [ON]: Enables the image stabilizer function. [OFF]: Disables the image stabilizer function. ffFactory setting: [ON] If functions are assigned to the USER buttons, switches [ON]/[OFF] using the USER button operations. Assigns the auto tracking white balance function to the switch. [Ach], [Bch], [PRE], [OFF] ffFactory setting: [OFF] Sets the control speed of the auto tracking white balance function. [FAST], [NORMAL], [SLOW] ffFactory setting: [NORMAL] Finely adjusts the Rch output for convergence with auto tracking white balance operation. [−10]...[10] ffFactory setting: [0] Finely adjusts the Bch output for convergence with auto tracking white balance operation. [−10]...[10] ffFactory setting: [0] Sets the color temperature to be assigned to the position of the switch. [3200K], [5600K], [VAR] ffFactory setting: [3200K] Sets the value of [VAR] in [W.BAL PRESET]. It can also be operated by the dial button. Enabled when [W.BAL PRESET] is set to [VAR] and the switch is at . [2000K]...[15000K] ffFactory setting: [3200K] Sets the zoom speed when the HANDLE ZOOM switch is . [1]...[99] ffFactory setting: [50] Assigns the operation mode when the button is pressed. [TURBO]: Performs high-speed focusing automatically until the image is focused, once the button is pressed. [NORMAL]: Performs automatic focusing while pressing the button. ffFactory setting: [TURBO] Sets whether to adjust the last focus automatically when in the manual focus mode. [ON]: Adjusts the last focus automatically. [OFF]: Does not adjust the focus automatically. ffFactory setting: [OFF] If the image is largely out of focus, the focus may not be adjusted properly. Operations with a remote control connected to the terminal are not available. Sets the operation mode of the focus assist function. [EXPAND]: Expands the center part of the screen of the LCD monitor. [IN RED]: Outlines the contour of the video in red. ffFactory setting: [EXPAND] If functions are assigned to the USER buttons, on and off of the function can be switched using the USER button operations. Enables/disables the focus macro function. [ON]: Enables the focus macro function. [OFF]: Disables the focus macro function. ffFactory setting: [ON] If functions are assigned to the USER buttons, switches [ON]/[OFF] using the USER button operations. Sets the operation mode when the focus macro function is enabled. [TELE OFF]: Does not use the tele macro area. [ALL OFF]: Does not use all of the macro area. ffFactory setting: [TELE OFF] - 126 -

Section	Page
Read this first!	2
Chapter 1 Overview	10
Before using the camera	11
Use of the camera on a system	13
Basic configuration devices	13
Expanded configuration devices	13
What you can do with this camera	14
Recording to the memory card	14
Linking to external devices	14
Connecting to the network	15
Chapter 2 Description of Parts	16
Left side	17
Right side	19
Front side, rear side	21
Top side	23
Chapter 3 Preparation	25
Power supply	26
Charging the battery	26
Attaching and removing the battery	27
Using the AC adaptor	27
Attaching and adjusting accessories	29
Adjusting the grip strap	29
Attaching the shoulder strap	29
Attaching the lens hood	29
Attaching the eye cup	30
Attaching the front microphone	31
Attaching a tripod	31
Turning on/off the power	32
How to turn on the power	32
How to turn off the power	32
Setting the date/time of the internal clock	33
P2 card	34
Inserting a P2 card	34
Removing a P2 card	35
Preventing accidental erasure	35
P2 card access LEDs and status of P2 cards	35
P2 card recording time	36
CPS (Content Protection System)	37
How to handle data recorded on P2 cards	37
Assigning functions to the USER buttons	38
Adjusting and setting the LCD monitor	40
Using the LCD monitor	40
Adjusting the LCD monitor	40
Mirror shooting	40
Highlighting the outlines of images	40
Adjusting and setting the viewfinder	41
Using the viewfinder	41
Adjusting the viewfinder	41
Highlighting the outlines of images	41
Tally lamp	42
Chapter 4 Shooting	43
Basic procedures	44
Preparation	44
Shooting	44
Selecting the resolution, codec, and video format for recording	45
Adjustable settings when shooting	47
Iris	47
Gain	47
Super gain	47
Brightness adjustment	47
Macro	47
Focusing (manual focus)	47
Focus assist function	48
Area mode function	49
Level gauge function	50
Adjusting the white and black balance	51
Adjusting the white balance	51
Adjusting the black balance	52
Using the zoom function	54
Setting the <ZOOM> switch	54
Adjusting the zoom position	54
Zoom ring	54
Adjusting image quality	55
Detail function	55
Skin tone function	55
RB gain control function	56
Chroma setting function	56
Matrix function	56
Color correction function	57
Black control function	57
Gamma function	57
Knee function	57
High color function	58
White clip function	58
Setting the electronic shutter	59
Shutter mode	59
Adjusting with the <SEL/PUSH SET> dial button and <MODE/MENU CANCEL> button	59
Flash band compensation (FBC) function	60
Setting the flash band compensation function	60
Variable frame rate (VFR) recording function	61
Native variable frame rate recording	61
Standard variable frame rate recording (pull-down recording)	61
Selecting audio input and adjusting recording levels	63
Selecting audio input signals	63
Using the built-in microphone	63
Using the external microphone and audio device	63
Adjusting the recording level	64
Displaying the audio level detailed	64
Getting position information using the GPS	65
Special recording functions	66
Pre-recording	66
Interval recording	66
One-shot recording	67
Loop recording	67
One-clip recording	68
Simultaneous recording	69
Hot swap recording	69
Recording check function	70
Shot mark recording function	70
Text memo recording function	70
Convenient shooting functions	71
Low angle shooting	71
Scan reverse shooting	71
Zebra patterns display	71
Displaying the center marker	71
Displaying the safety zone marker	71
Displaying frame marker	72
Checking and displaying the shooting status	72
Changing image size	72
Image stabilization function	72
Dynamic range stretcher function	72
Backlight compensation	72
Color bars	72
Time stamp function	72
Deleting last clip function	73
Waveform monitor function	73
Direct menu operation	73
Multi formats	74
Selecting recording signals	74
System modes and recording functions	74
List of recording settings and recording functions	76
Selecting video output	77
Recording/playback and output format list	78
Dual codec recording	79
Dual codec recording setting	79
Recording the proxy data	79
Recording to the SD memory card	79
Checking the proxy data	80
Error displays about proxy data recordings	81
Handling setting data	83
Setting data file configuration	83
Handling SD memory cards	83
Performing operations on SD memory cards	84
How to use user data	85
How to use scene file data	85
How to restore the scene file or menu setting status to the factory settings	87
Saving to an SD memory card and loading saved data	87
Selection of external reference signal and generator lock setting	88
Locking the video signal to the external reference signal	88
Setting the time data	89
Recording of time codes and user bits	89
User bits settings	92
How to input user bits	93
Setting the time code	93
Externally locking the time code	94
Supplying the time code externally	96
Connecting and setting the genlock and time code input/output	96
Setting and displaying the counter	97
Chapter 5 Playback	98
Basic procedures	99
Preparation	99
Playback	99
Thumbnail operations	100
Thumbnail operation overview	100
Thumbnail screen	100
Selecting thumbnails	102
Setting thumbnail screen display	102
Changing thumbnails	103
Shot mark	104
Text memo	104
Deleting clips	105
Restoring clips	105
Reconnecting incomplete clips	106
Copying clips	106
Setting clip metadata	106
Formatting a P2 card	108
Formatting SD memory cards	109
Properties	109
Chapter 6 Menu Operations	114
Setting menu structure	115
Menu types and how to open them	115
Main menu structure	115
Setting menu display	116
Setting menu basic operations	116
Setting [USER MENU]	117
Setting menu initialization	117
Menu list	119
[SCENE FILE]	119
[SYSTEM MODE]	124
[USER SW]	125
[SW MODE]	126
[AUTO SW]	127
[RECORDING SETUP]	128
[CLIP]	129
[AUDIO SETUP]	131
[OUTPUT SEL]	132
[NETWORK SETUP]	134
[DISPLAY SETUP]	135
[CARD FUNCTIONS]	138
[OTHER FUNCTIONS]	138
[MAINTENANCE]	138
[DIAGNOSTIC]	139
[USER MENU SEL]	139
[OPTION MENU] list	140
[AREA SELECT]	140
[AWB PRE CONTROL]	140
[CAM REMOTE ADJ.]	140
[ENG SECURITY]	140
Chapter 7 Display	141
Screen status display	142
Configuration of status display on screen	142
Selecting display items on screen	142
Displaying screen	142
Checking and displaying shooting status	146
Mode check display	147
Chapter 8 Connecting to External Devices	149
Connecting with headphones, remote control, or TV/monitor	150
Headphones	150
Remote control	150
TV/monitor	150
Connection function via <USB2.0 DEVICE> or <USB3.0 HOST> terminal	152
Connecting to a computer in the USB device mode	152
Connecting to external devices in USB host mode	152
Chapter 9 Network Connection	161
Network connection	162
Available functions	162
Operating environment	162
Preparing for connection	163
For wireless LAN	163
For wired LAN	164
Network settings	165
Wireless LAN settings	165
Wired LAN settings	166
P2 browser function settings and connection status check	168
FTP client function setting	168
Using FTP client function	170
FTP server folder list (FTP explorer screen)	170
Deleting clips on the FTP server	171
Viewing information of clips on FTP server	171
Transferring from a P2 card to an FTP server (copy)	172
Writing back from an FTP server to a P2 card (copy)	172
Transferring from an SD card to an FTP server (export)	172
Writing back from an FTP server to an SD memory card (import)	173
Chapter 10 Maintenance and Inspection	174
Maintenance	175
Charging the built-in battery	175
Frequently asked questions	176
Power supply	176
Battery	176
Shooting	176
Editing	176
Playback	176
Others	177
Warning system	178
Cases indicated by error codes	178
Cases indicated by error messages	178
Updating the camera firmware	182
Cleaning and storing	183
Cleaning the camera recorder	183
Cautions when storing the camera recorder	183
Chapter 11 Specification	184
Specifications	185
Dimensions	185
Specifications	185

Match case Limit results 1 per page

– 126 –

Chapter 6 Menu Operations — Menu list

[SW MODE]

Conﬁgure the settings of each mode when switched using each switch.

These menu items cannot be set when the thumbnail screen is displayed.

Item

Description of settings

[LOW GAIN]

Sets the gain value to be assigned to the <L> position of the <GAIN> switch. (Negative value of gain is

only in [HIGH SENS.] mode.)

[

−

3dB]…[18dB]

Factory setting: [0dB]

[MID GAIN]

Sets the gain value to be assigned to the <M> position of the <GAIN> switch. (Negative value of gain is

only in [HIGH SENS.] mode.)

[

−

3dB]…[18dB]

Factory setting: [6dB]

[HIGH GAIN]

Sets the gain value to be assigned to the <H> position of the <GAIN> switch. (Negative value of gain is

only in [HIGH SENS.] mode.)

[

−

3dB]…[18dB]

Factory setting: [12dB]

[SUPER GAIN]

Sets the super gain to be assigned to the USER button.

[24dB], [30dB], [36dB]

[ALL]:

Each time the USER button is pressed, the camera toggles [24dB]

→

[30dB]

→

[36dB]

→

(off) in

order.

Factory setting: [36dB]

[OIS]

Enables/disables the image stabilizer function.

[ON]:

Enables the image stabilizer function.

[OFF]:

Disables the image stabilizer function.

Factory setting: [ON]

If functions are assigned to the USER buttons, switches [ON]/[OFF] using the USER button operations.

[ATW]

Assigns the auto tracking white balance function to the <WHITE BAL> switch.

[Ach], [Bch], [PRE], [OFF]

Factory setting: [OFF]

[ATW SPEED]

Sets the control speed of the auto tracking white balance function.

[FAST], [NORMAL], [SLOW]

Factory setting: [NORMAL]

[ATW TARGET R]

Finely adjusts the Rch output for convergence with auto tracking white balance operation.

[

−

10]…[10]

Factory setting: [0]

[ATW TARGET B]

Finely adjusts the Bch output for convergence with auto tracking white balance operation.

[

−

10]…[10]

Factory setting: [0]

[W.BAL PRESET]

Sets the color temperature to be assigned to the <PRST> position of the <WHITE BAL> switch.

[3200K], [5600K], [VAR]

Factory setting: [3200K]

[W.BAL VAR]

Sets the value of [VAR] in [W.BAL PRESET].

It can also be operated by the <SEL/PUSH SET> dial button.

Enabled when [W.BAL PRESET] is set to [VAR] and the <WHITE BAL> switch is at <PRST>.

[2000K]…[15000K]

Factory setting: [3200K]

[H.ZOOM SPEED]

Sets the zoom speed when the HANDLE ZOOM switch is <FIX>.

[1]…[99]

Factory setting: [50]

[PUSH AF MODE]

Assigns the operation mode when the <PUSH AUTO> button is pressed.

[TURBO]:

Performs high-speed focusing automatically until the image is focused, once the button is

pressed.

[NORMAL]:

Performs automatic focusing while pressing the button.

Factory setting: [TURBO]

[MF ASSIST]

Sets whether to adjust the last focus automatically when in the manual focus mode.

[ON]:

Adjusts the last focus automatically.

[OFF]:

Does not adjust the focus automatically.

Factory setting: [OFF]

If the image is largely out of focus, the focus may not be adjusted properly.

Operations with a remote control connected to the <CAM REMOTE> terminal are not available.

[FOCUS ASSIST MODE]

Sets the operation mode of the focus assist function.

[EXPAND]:

Expands the center part of the screen of the LCD monitor.

[IN RED]:

Outlines the contour of the video in red.

Factory setting: [EXPAND]

If functions are assigned to the USER buttons, on and off of the function can be switched using the USER

button operations.

[MACRO]

Enables/disables the focus macro function.

[ON]:

Enables the focus macro function.

[OFF]:

Disables the focus macro function.

Factory setting: [ON]

If functions are assigned to the USER buttons, switches [ON]/[OFF] using the USER button operations.

[MACRO MODE]

Sets the operation mode when the focus macro function is enabled.

[TELE OFF]:

Does not use the tele macro area.

[ALL OFF]:

Does not use all of the macro area.

Factory setting: [TELE OFF]