Panasonic Handheld P2 HD Camcorder with AVC-ULTRA Recording Operating Instruct - Page 150
Connecting with headphones, remote control, or TV/monitor, Headphones
View all Panasonic Handheld P2 HD Camcorder with AVC-ULTRA Recording manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 150 highlights
Chapter 8 Connecting to External Devices - Connecting with headphones, remote control, or TV/monitor Connecting with headphones, remote control, or TV/monitor Headphones Headphones (optional) can be connected to the headphone terminal (3.5 mm stereo mini jack). Headphone terminal @@NOTE tt When headphones are connected, audio is not output from the speaker. Remote control Remote control (optional) can be connected to the terminals (, ). When the remote control is connected to the terminal (3.5 mm mini jack), you can remotely control the focus and iris operations. When the remote control is connected to the terminal (2.5 mm super mini jack), you can remotely control the zoom and recording start/ stop operations. terminal terminal @@NOTE tt Do not connect a device other than a remote control to the terminals. Connecting a device other than a remote control may change the brightness or cause defocus of images. TV/monitor A TV or monitor can be connected as shown in the following figure. Audio cable (optional) 3.5 mm diameter jack-pin conversion cable HDMI cable (optional) BNC cable (optional) BNC cable (optional) TV/monitor @@NOTE tt VIERA Link is not supported on the camera. Please be aware that when using an HDMI cable and connecting this camera to a device that supports VIERA Link, the VIERA Link of other devices may not work in some cases. tt SD signals (480i, 576i) output from the terminal are converted to progressive signals (480P, 576P) then output. tt For the BNC cable (optional) connected to the terminal, prepare a double-shielded cable equivalent to 5C‑FB. - 150 -