Panasonic Handheld P2 HD Camcorder with AVC-ULTRA Recording Operating Instruct - Page 133
Description of settings, 1080i], LEVEL-A], SIDE CROP], [LETTER BOX], [SQUEEZE], ON], [OFF], 2.5MHz]
View all Panasonic Handheld P2 HD Camcorder with AVC-ULTRA Recording manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 133 highlights
Item [SDI&HDMI SELECT] [3G‑SDI OUT] [SDI OUT CHAR] [SDI EDH] [HD SDI REMOTE] [DOWNCON MODE] [DOWNCON SETTING] [DETAIL] [VIDEO OUT] [H.DTL LEVEL] [V.DTL LEVEL] [DTL CORING] [H.DTL FREQ] [VIDEO OUT CHAR] [VIDEO OUT ZEBRA] [TC OUT] [TC OUTPUT REF] Chapter 6 Menu Operations - Menu list Description of settings Selects output signals from the terminal and terminal. [SYSTEM MODE]: Follows the setting in [SYSTEM MODE] → [LINE&FREQ]. [1080i]: Converts into interlaced signals and outputs them when [1080‑59.94P] or [1080‑50P] is selected in [SYSTEM MODE] → [LINE&FREQ]. This cannot be selected when other settings are made. [DOWNCON]: Down converts to SD signal and outputs. ffFactory setting: [SYSTEM MODE] Selects 1080P signals of the HD SDI output in 1080P mode. [LEVEL‑A]: Selects the LEVEL‑A method. [LEVEL‑B]: Selects the LEVEL‑B DL method. ffFactory setting: [LEVEL‑B] Selects whether to superimpose characters on terminal output images. [ON]: Superimposes. [OFF]: Does not superimpose. ffFactory setting: [OFF] Selects whether to superimpose EDH when output from the terminal is SD signal (480i and 576i). [ON]: Superimposes. [OFF]: Does not superimpose. ffFactory setting: [ON] Sets whether to use the control function of recording operation for an external device (such as a recorder) connected to the terminal at HD SDI output. [ON]: Controls the recording operation of the external device. [OFF]: Does not control the recording operation of the external device. ffFactory setting: [OFF] Selects the mode of the down converter output signal mode from the or terminal in HD mode (1080P, 1080i, or 720P). [SIDE CROP], [LETTER BOX], [SQUEEZE] ffFactory setting: [LETTER BOX] Turns detail function for the down converter output signal [ON]/[OFF]. [ON], [OFF] The down converter output signal contains detail components set during HD signal processing. This setting superimposes the detail components exclusive to down converter output to that signal. ffFactory setting: [ON] Sets horizontal detail correction level for the down converter output signal. [0]...[31] ffFactory setting: [8] Sets vertical detail correction level for the down converter output signal. [0]...[31] ffFactory setting: [4] Sets the detail noise removal level. [0]...[15] ffFactory setting: [1] Selects the horizontal detail frequency. [2.5MHz], [3MHz], [3.5MHz], [4MHz], [4.5MHz] ffFactory setting: [3.5MHz] Selects the terminal output [ON]/[OFF]. [ON]: Performs output. [OFF]: Stops output. ffFactory setting: [OFF] Selects whether to superimpose characters on terminal output images. [ON]: Superimposes. [OFF]: Does not superimpose. ffFactory setting: [ON] Selects whether the zebra pattern is superimposed over the output video signals from the terminal. [ON]: Superimposes. [OFF]: Does not superimpose. ffFactory setting: [OFF] Sets the type of time code output from the terminal. [TCG]: Outputs the time code generator value of the camera at all times. [TCG/TCR]: Outputs the time code generator value for camera image output, and the time code value of the video being played back for video playback output. ffFactory setting: [TCG] Sets the output delay of time code output from the terminal. [RECORDING]: Outputs the recorded time code with no delay. This is used when performing simultaneous recording on two cameras with the time code of this camera as the master. [VIDEO OUT]: Matches to output images. ffFactory setting: [VIDEO OUT] - 133 -