Panasonic Handheld P2 HD Camcorder with AVC-ULTRA Recording Operating Instruct - Page 128
[recording Setup], Low 2ch Mov], [avc-g6 2ch Mov]
View all Panasonic Handheld P2 HD Camcorder with AVC-ULTRA Recording manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
[ATW] Item [AF] Chapter 6 Menu Operations - Menu list Description of settings Sets the operations of the auto tracking white balance function. [ON]: Activates the auto tracking white balance function when in auto mode. The [ATW] function cannot be enabled/disabled with the switch or USER buttons. However, if [ATW LOCK] is assigned to a USER button, the white balance value can be fixed with the USER button. [OFF]: Does not perform the operation of the [ATW] function when in auto mode. Performs the operation of the white balance function selected with the switch. ffFactory setting: [ON] Sets the operation of the auto focus. [ON]: Performs the operation of auto focus when in auto mode. The switch does not work. [OFF]: Does not perform the operation of auto focus when in auto mode. Activates the focus function selected with the switch. ffFactory setting: [ON] [RECORDING SETUP] These are various types of setting items when performing camera recording and playback. Set the system frequency, the number of lines, recording format, and recording method. [REC MEDIA] Item [FILE SPLIT] [RECORDING] [RECORDING SETTING] [RECORDING HOLD] [ONE SHOT TIME] [INTERVAL TIME] [START DELAY] [PRE REC] [ONE CLIP REC] [SIMUL REC] [DUAL CODEC SETTING] [REC MEDIA] [PROXY MODE] [PROXY DISP] [START TEXT MEMO] Description of settings Selects the slot for the media to be recorded. [microP2]: Uses microP2 memory cards (slots 1 and 2). [P2]: Uses P2 memory card (card slot 3). ffFactory setting: [microP2] Selects whether to divide the recording file in 4 GB units or one file when recording in the microP2 memory card (that exceeds 32 GB) in AVC‑LongG format. [ONE FILE]: Records in one file. [SPLIT]: Splits the clip every 4 GB. ffFactory setting: [ONE FILE] Selects the recording format. [NORMAL]: Performs standard recording. [INTERVAL]: Performs interval recording. [ONE SHOT]: Performs one-shot recording. [LOOP]: Performs loop recording. ffFactory setting: [NORMAL] Selects whether to hold [RECORDING] settings. [ON]: Holds the settings. [OFF]: Does not hold the settings. It will always be [NORMAL] the next time when the power is turned on. ffFactory setting: [OFF] Sets the recording duration of one-shot recording. [1frm], [2frm], [4frm], [8frm], [16frm], [1s] ffFactory setting: [1frm] Sets the interval duration for interval recording. [2frm], [4frm], [8frm], [16frm], [1s], [2s], [5s], [10s], [30s], [1min], [5min], [10min] ffFactory setting: [2frm] Selects whether to delay the recording start time by approximately one second when performing interval recording or one-short recording. [ON], [OFF] ffFactory setting: [OFF] Selects whether to perform pre-recording. If [ON] is selected, pre-recording is performed for approximately three seconds in HD, and for approximately seven seconds in SD. [ON], [OFF] ffFactory setting: [OFF] Selects whether to perform one-clip recording. [ON], [OFF] ffFactory setting: [OFF] Selects whether to perform simultaneous recording. [ON], [OFF] ffFactory setting: [OFF] Selects media for recording proxy data. [P2]: Records proxy data to a P2 card. [P2&SD]: Records proxy data to both of a P2 card and SD memory card. [OFF]: Does not record proxy data. ffFactory setting: [OFF] Sets the recording mode of proxy data. [LOW 2CH MOV], [HQ 2CH MOV], [SHQ 2CH MOV], [AVC-G6 2CH MOV] ffFactory setting: [HQ 2CH MOV] Selects whether to display proxy data recorded information or messages in the viewfinder and LCD monitor. [ON]: Displays proxy recording information and SD memory card remaining capacity at the start of recording. Warning information is displayed at all times. [OFF]: Displays proxy and SD memory card warning information for only three seconds when warning occurs. ffFactory setting: [OFF] Selects whether to automatically add a text memo at recording start position each time recording is started. [ON], [OFF] ffFactory setting: [OFF] - 128 -