Panasonic Handheld P2 HD Camcorder with AVC-ULTRA Recording Operating Instruct - Page 143
Display - Screen status display
View all Panasonic Handheld P2 HD Camcorder with AVC-ULTRA Recording manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 143 highlights
Chapter 7 Display - Screen status display ff[CLIP]: Clip counter value (recording mode only) Clip counter value for each recording Displayed when [CLIP] is set in the main menu → [DISPLAY SETUP] → [REC COUNTER]. ff[TCG]: Time code value When operating in drop frame mode, the ":" (colon) mark between the second and frame changes to "." (dot). During playback, [TCR] is displayed. ff[UBG]: User bits value During playback, [UBR] is displayed. ff[VUBG]: User bits value of VITC During playback, [VUBR] is displayed. @@NOTE tt For [TCG] and [UBG], if they are locked to the input signal from the terminal, [TCG] and [UBG] are displayed in white letters with outlines. 2 Shooting/recording and playback frame rate display For variable frame rate recording, the number of frames for shooting and the number of frames for recording/playback are displayed. Example) 60:24PN (variable frame rate in 60P shooting, 24PN recording) For playback, 2:3 pull-down is performed to make the video 24P over 60P, and playback in 24/60 times speed is indicated. For standard recording, only the shooting frame rate is displayed. 3 Proxy information display Displays the proxy recording information. ff[PROXY P2 (P2&SD)]: Displayed when proxy recording is started. ff[PROXY ERR]: Displayed when there is an error in proxy recording. 4 SD memory card status display ff[WP]: Write protected ff[END]: No remaining free space ff[WR ERR]: Write error ff[SD ***min]: The remaining free space is displayed when proxy is recorded to an SD memory card. (Displayed only in the regular mode check.) Flashing when the remaining capacity is one minute or less. [−−min] is displayed when there is no SD memory card. 5 System mode display Displays the mode in which the camera is operating. ff[1080‑59.94P]: 1080/59.94 progressive mode ff[1080‑59.94i]: 1080/59.94 interlaced mode ff[1080‑50P]: 1080/50 progressive mode ff[1080‑50i]: 1080/50 interlaced mode ff[720‑59.94P]: 720/59.94 progressive mode ff[720‑50P]: 720/50 progressive mode ff[480‑59.94i]: 480/59.94 interlaced mode ff[576‑50i]: 576/50 interlaced mode 6 Recording format display Displays the recording method. ff[AVC‑I100] ff[AVC‑I50] ff[AVC‑G50] ff[AVC‑G25] ff[AVC‑G12] ff[DVCPRO HD] ff[DVCPRO50] ff[DVCPRO] ff[DV] 7 Letterbox recording display Displayed while letterbox recording is performed when the recording format is 480i/576i and [LETTER BOX] is set in the main menu → [SYSTEM MODE] → [ASPECT CONV]. 8 USER button information display When the USER button is pressed, "USER button name: assigned function name" is displayed for three seconds. The USER button name is indicated by [U1] to [U8]. 9 Focus bar display Displays the following items in the bottom left of the viewfinder. The high-frequency component of the video is displayed in a numerical value. ffWhite bar: Focus bar display ffGreen line: Peak display 10 Time stamp recording display Displays [R] when time stamp recording is set. - 143 -