Panasonic Handheld P2 HD Camcorder with AVC-ULTRA Recording Operating Instruct - Page 135
[DISPLAY SETUP], Description of settings, ENABLE], DISABLE], ON], [SPOT], [OFF]
View all Panasonic Handheld P2 HD Camcorder with AVC-ULTRA Recording manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 135 highlights
Chapter 6 Menu Operations - Menu list [NETWORK TOOL] Item [DHCP] [IP ADDRESS] [SUBNET MASK] [DEFAULT GATEWAY] [PRIMARY DNS] [SECONDARY DNS] [DHCP SERVER] [LOG DISPLAY] [STATUS DISPLAY] [INITIALIZE] [PING] Description of settings Sets whether to use automatic acquisition via DHCP when [INFRA] is selected in [TYPE]. [ENABLE]: Uses automatic acquisition. [DISABLE]: Does not use automatic acquisition. Set [IP ADDRESS], [SUBNET MASK], [DEFAULT GATEWAY], [PRIMARY DNS], and [SECONDARY DNS]. ffFactory setting: [ENABLE] Sets the IP address when [DISABLE] is selected in [DHCP]. ffFactory setting: [192.168.0.1] Sets the subnet mask when [DISABLE] is selected in [DHCP]. ffFactory setting: [255.255.255.0] Sets the default gateway when [INFRA] is selected in [TYPE] and [DISABLE] is selected in [DHCP]. ffFactory setting: [192.168.0.254] Sets the primary DNS server when [INFRA] is selected in [TYPE] and [DISABLE] is selected in [DHCP], or when [ENABLE] is selected in [DHCP] and the primary DNS server cannot be obtained. ffFactory setting: [0.0.0.0] Sets the secondary DNS server when [INFRA] is selected in [TYPE] and [DISABLE] is selected in [DHCP], or when [ENABLE] is selected in [DHCP] and the primary DNS server cannot be obtained. ffFactory setting: [0.0.0.0] Sets whether to use the DHCP SERVER function when [DIRECT] is selected in [TYPE] and the camera is connected via wireless LAN. [ENABLE]: Uses the DHCP SERVER function. [DISABLE]: Does not use the DHCP SERVER function. ffFactory setting: [ENABLE] Displays the connection log. Displays the network status. Restores the network setting status to the factory settings. Checks network connection using PING commands. [DISPLAY SETUP] Configure the settings regarding the details to be displayed on the viewfinder or LCD monitor. These menu items cannot be set when the thumbnail screen is displayed. [MENU DISPLAY] Item [ZEBRA1 DETECT] [ZEBRA2 DETECT] [ZEBRA2] [CENTER MARK] [SAFETY MARK] [SAFETY AREA] [FRAME MARK] [FRAME SIG] [FRAME LVL] [LEVEL GAUGE] Description of settings Selects the LCD monitor or the view finder as the location where the menu is displayed. [LCD&EVF]: Displays the menu both on the LCD monitor and the viewfinder. [LCD]: Displays the menu only on the LCD monitor. ffFactory setting: [LCD&EVF] Sets the extraction level of zebra pattern 1. [0%]...[109%] ffFactory setting: [70%] Sets the extraction level of zebra pattern 2. [0%]...[109%] ffFactory setting: [85%] Sets on/off of zebra pattern 2 and selects the type. [ON], [SPOT], [OFF] ffFactory setting: [SPOT] Controls the center mark. [1]: + (large) [2]: Open center (large) [3]: + (small) [4]: Open center (small) [OFF]: Does not display. ffFactory setting: [1] Selects the type of frame for the safety zone marker. [1]: Box [2]: Corners [OFF]: Does not display. ffFactory setting: [2] Sets the size of the safety zone marker. The constant ratio of length to width can be set in 1% increments. [80%]...[100%] ffFactory setting: [90%] Enables/disables frame marker. [ON], [OFF] ffFactory setting: [OFF] Sets frame marker aspect ratio. [4:3], [13:9], [14:9], [1.85:1], [2.35:1] ffFactory setting: [4:3] Sets the level of the outside of the frame marker. [0]...[15] ffFactory setting: [15] Enables/disables level gauge. [ON], [OFF] ffFactory setting: [OFF] - 135 -