Panasonic Handheld P2 HD Camcorder with AVC-ULTRA Recording Operating Instruct - Page 27
Attaching and removing the battery, Using the AC adaptor, Attaching, Removing
View all Panasonic Handheld P2 HD Camcorder with AVC-ULTRA Recording manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Chapter 3 Preparation - Power supply Attaching and removing the battery Attaching 1 Insert the battery until you hear it clicks. Removing Lock release button Power switch Battery release button 1 Turn the power switch to while holding down the lock release button. Make sure that the LCD monitor has gone off. 2 Lift up and remove the battery while holding down the battery release button. Support the battery with your hand so that it does not fall down. Using the AC adaptor Attaching To the power outlet (1) (2) terminal 1 Connect an AC cable. Connect in the order shown in the figure. - 27 -
– 27 –
Chapter 3 Preparation — Power supply
Attaching and removing the battery
Attaching
1
Insert the battery until you hear it clicks.
Removing
Battery release button
Lock release button
Power switch
1
Turn the power switch to <OFF> while holding down the lock release button.
Make sure that the LCD monitor has gone off.
2
Lift up and remove the battery while holding down the battery release button.
Support the battery with your hand so that it does not fall down.
Using the AC adaptor
Attaching
(1)
(2)
<DC IN 12V> terminal
To the power outlet
1
Connect an AC cable.
Connect in the order shown in the figure.