Panasonic KXTA30820 Installation Manual - Page 249

4.2 System Programming Pulse Speed Selection 402 Description Selection Default Programming Conditions Feature Reference An outside (CO) line set for pulse or call blocking mode in program [401] "Dial Mode" can have two pulse rates, 10 pps (low) and 20 pps (high). This program sets the pulse speed for each outside (CO) line which has set the pulse or call blocking mode. • Outside (CO) line number: 1 - 3, ( = all outside (CO) lines) • Low Speed (10 pps) / High Speed (20 pps) All outside (CO) lines - Low Speed 1. Enter 402. Display: Pulse Speed 2. Press NEXT. Display: CO NO? → 3. Enter an outside (CO) line number. Pressing NEXT also can enter outside (CO) line number 1. Display example: CO 1: Low Speed 4. Keep pressing SELECT until the desired selection is displayed. 5. Press STORE. 6. To program another outside (CO) line, press NEXT or PREV, or SELECT and enter the desired outside (CO) line number. 7. Repeat steps 4 through 6. 8. Press END. • To assign all outside (CO) lines to the same selection, press the key in step 3. In this case, the display will show: CO :Mixed. • The required pulse speed is determined by the outside (CO) or Host PBX line. Section 3, Features Dial Type Selection System Programming 4-57