Panasonic KXTA30820 Installation Manual - Page 250
[403] Host PBX Access Codes
UPC - 037988850709
View all Panasonic KXTA30820 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 250 highlights
403 Description Selection Default Programming 4.2 System Programming Host PBX Access Codes Assigns Host PBX access codes. If the system is installed behind a host PBX system, an access code is required to make an outside call. Up to eight codes can be stored for an outside (CO) line connected to the host PBX. • Outside (CO) line number: 1 - 3, ( = all outside (CO) lines) • Access code: 1 or 2 digits, eight different entries (max.) All outside (CO) lines - Not stored 1. Enter 403. Display: Host PBX Access 2. Press NEXT. Display: CO NO? → 3. Enter an outside (CO) line number. Pressing NEXT also can enter outside (CO) line number 1. Display example: CO 1:Not Stored 4. Enter an access code. To delete the current entry, press CLEAR. To change the current entry, press CLEAR and enter the new access code. Display example: CO 1:01 5. To enter more access codes for the same outside (CO) line, press "," (CONF button) and enter the access codes until all of the required entries are completed. Display example: CO 1:01,08,10,22 6. Press STORE. 7. To program another outside (CO) line, press NEXT or PREV, or SELECT and enter the desired outside (CO) line number. 8. Repeat steps 4 through 7. 9. Press END. 4-58 System Programming