Panasonic KXTA30820 Installation Manual - Page 262
[419] Automatic Designated Outside (CO) Line Access, Repeat steps 4 and 6.
UPC - 037988850709
View all Panasonic KXTA30820 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 262 highlights
419 4.2 System Programming Automatic Designated Outside (CO) Line Access Description Selection Default Programming Condition Feature References Assigns the sequence in which outside (CO) lines will be accessed during the Automatic Line Access mode. When a user dials the feature number for automatic line access (9), an idle line is searched for in the programmed outside (CO) lines. • Outside (CO) line number: 1 - 3, ( = all outside (CO) lines) • Enable / Disable All outside (CO) lines - Enable 1. Enter 419. Display: Auto Line Access 2. Press NEXT. Display: CO NO? → 3. Enter an outside (CO) line number. Pressing NEXT also can enter outside (CO) line number 1. Display example: CO 1:Enable 4. Keep pressing SELECT until the desired selection is displayed. 5. Press STORE. 6. To program another outside (CO) line, press NEXT or PREV, or SELECT and enter the desired outside (CO) line number. 7. Repeat steps 4 and 6. 8. Press END. • To assign all outside (CO) lines to the same selection, press the key in step 3. In this case, the display will show: CO :Mixed. Section 3, Features Line Access, Automatic Line Preference - Outgoing 4-70 System Programming