Panasonic KXTA30820 Installation Manual - Page 303
[706] Doorphone Ringing/Tone Pattern Selection
UPC - 037988850709
View all Panasonic KXTA30820 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 303 highlights
4.2 System Programming 706 Doorphone Ringing/Tone Pattern Selection Description Assigns an incoming doorphone call ringing pattern for each doorphone. There are four types of patterns as follows. 1 s Selection Single: Double: Triple: S-Double: Default Programming Conditions Feature Reference • Doorphone number: 1 - 2, ( = all doorphones) • Single / Double / Triple / S-Double All doorphones - Triple 1. Enter 706. Display: Door Ring Tone 2. Press NEXT. Display: Door NO? → 3. Enter a doorphone number. Pressing NEXT also can enter doorphone number 1. Display example: DP-1:Triple 4. Keep pressing SELECT until the desired selection is displayed. 5. Press STORE. 6. To program another doorphone, press NEXT or PREV, or SELECT and enter the desired doorphone number. 7. Repeat steps 4 through 6. 8. Press END. • To assign all doorphones to the same selection, press the key in step 3. In this case, the display will show: DP- :Mixed. • PT users will hear the assigned pattern tone instead of ringing. • The programs [115] "Extension Ringing Pattern Selection" and [423] "Outside (CO) Line Ringing Pattern Selection" should be considered when assigning this program. Section 3, Features Doorphone Call System Programming 4-111