Panasonic KXTA30820 Installation Manual - Page 304
[707] Doorphone Access Tone Selection, Enable / Disable, doorphone number, SELECT, STORE
UPC - 037988850709
View all Panasonic KXTA30820 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 304 highlights
707 4.2 System Programming Doorphone Access Tone Selection Description Selection Default Programming Condition Feature References Enables or disables sending a doorphone access tone to a monitored doorphone. If enabled, the access tone is heard from the doorphone when monitoring starts. • Doorphone number: 1 - 2, ( = all doorphones) • Enable / Disable All doorphones - Enable 1. Enter 707. Display: Door Ack-Tone 2. Press NEXT. Display: Door NO? → 3. Enter a doorphone number. Pressing NEXT also can enter doorphone number 1. Display example: DP-1:Enable 4. Keep pressing SELECT until the desired selection is displayed. 5. Press STORE. 6. To program another doorphone, press NEXT or PREV, or SELECT and enter the desired doorphone number. 7. Repeat steps 4 through 6. 8. Press END. • To assign all doorphones to the same selection, press the key in step 3. In this case, the display will show: DP- :Mixed. Section 3, Features Doorphone Call Room Monitor 4-112 System Programming