Panasonic PVDM2093 PVDM2093 User Guide - Page 23

MTS Broadcast/TV Stereo System Equipped with -TV Noise Reduction for true MTS reproduction. -TV Noise Reduction is required for good stereo separation and audio fidelity. is a registered trademark, and is licensed by Technology Licensing. DISPLAY AUDIO Receivable Broadcast Types The following are possible audio broadcast types and on-screen displays. The signal being received is indicated with an " " mark while the selected audio mode is indicated with an arrow. To change the audio mode for these broadcasts, see the "Audio Mode for TV Viewing" section below. Press DISPLAY to display the broadcast signal being received. 12 : 00AM CH08 MTS Stereo and SAP broadcast STEREO SP Multi-channel Television Sound Stereo SAP MONO (main language) and Secondary Audio Program (sub language) broadcasts are being received simultaneously. Select the STEREO or SAP audio mode. 12 : 00AM CH08 MTS Stereo broadcast STEREO SAP MONO SP Multi-channel Television Sound Stereo broadcast. Select STEREO audio mode. • If stereo broadcast is weak and the display flickers, select MONO audio mode for possible improvement. 12 : 00AM CH08 SAP broadcast STEREO SP Secondary Audio Program (sub SAP MONO language). Select SAP audio mode for the sub language. 12 : 00AM CH08 MONO broadcast STEREO SP Normal monaural sound broadcast. SAP MONO TV Operation Audio Mode for TV Viewing Press AUDIO to select the desired audio mode as described above. (Arrow shows selection.) • Each press of AUDIO will change the audio mode as shown below. • "SAP" is selected with first press of AUDIO. < Example > Press AUDIO STEREO SAP MONO Press AUDIO STEREO SAP MONO Press AUDIO STEREO SAP MONO 23