Panasonic PVDM2093 PVDM2093 User Guide - Page 31

*Important: If a remote control button does not work when pressed, press the TV/VCR button on the remote and try the button again. Cancel a Timer Recording: (Recording is in progress) Hold down STOP for a few seconds to cancel the Timer Recording. • Any future daily or weekly recordings will be performed as programmed. Review, Replace or Clear Program Contents : (Recording is not in progress) 1 Repeat steps 1 and 2 on page 30. 2 Press to select the desired program. ADD/DLT SELECT SET STOP PROG CANCEL : ADD / DLT SELECT 1 - 8 : ENTER : SET END : PROG 3 To Replace program... DATE START STOP 8 SAT 9:00P 12:00A TODAY CH 08 1) Press SET to display. S-L-P- 2) Press to select SELE CT START DATE and press SET SELECT : SET : SET BACK : or to set new END : PROG program contents. 3) Press PROG. To Clear program... P DT START STOP CH SPD 1 2 8 10 : 00p12 : 00a125 SP 3 10 8 : 00p 9 : 00p 10 SP 4 SU 9 : 00p10 : 00p L LP Press ADD/DLT. SELECT 1 - 8 : ENTER : SET END : PROG 4 Press PROG twice to exit this mode. Notes • 2 minutes before Timer recording is performed, "PLEASE PREPARE FOR TIMER REC" appears and/or the PROG TIMER Indicator flashes. Be sure a cassette with record tab is loaded and the unit is in Stop mode. • If the start times of two programs overlap, the lower numbered program will have priority. • If the start time for a Timer Recording comes up during a normal recording or One Touch Recording (page 18), the Timer Recording will not be performed. • If there is a power interruption of more than one minute, the recording may not be performed or continued. • If "INCOMPLETE" appears after all items have been set, check all entries and make necessary corrections. Timer Operation 31