Panasonic SABT100 Blu-ray Dvd Home Theater Sound System - Page 34
Speaker settings, Speaker presence settings, Changing the delay time, Adjusting speaker level
View all Panasonic SABT100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Changing settings with the setup menu Speaker settings Speaker presence settings (Center, surround and surround back speakers only) 1 Press [3, 4, 2, 1] to select the speaker icon and press [OK]. L ms dB 0.0 C 0.0 R Center Complete Test dB 0.0 SW dB ms dB LS 0.0 0.0 0.0 RS Surround dB ms dB 0.0 LB 0.0 RB 0.0 Surround back§1 2 Press [3, 4] to select the setting and press [OK]. Icon examples: Center Select when the center speaker is C connected and in use. §2 Select when the center speaker is not connected or not in use. Surround Surround back§1 Select when the surround speakers are LS connected and in use. Select when the surround speakers are not connected or not in use. Select when - using the optional Panasonic wireless system SH-FX67 and speaker system SB-HS100A to enjoy 7.1ch surround sound. LB - connecting an amplifier to the SURROUND BACK terminal at the back of the main unit to enjoy 7.1ch surround sound. Select when the surround back speakers are not connected or not in use. §1Surround back speakers are set to " " by default. §2You can select " " only when surround speakers are set to " ". e.g., 5.1ch speaker connection 7.1ch speaker connection ms dB L 0.0 C 0.0 R ms dB L 0.0 C 0.0 R Complete Test dB 0.0 SW dB ms dB LS 0.0 0.0 0.0 RS dB ms dB 0.0 LB 0.0 RB 0.0 Complete Test dB 0.0 SW dB ms dB LS 0.0 0.0 0.0 RS dB ms dB 0.0 LB 0.0 RB 0.0 Changing the delay time (Effective when playing multi-channel audio) (Center, surround and surround back speakers only) For optimum listening with 7.1/5.1-channel sound, all the speakers, except for the subwoofer, should be the same distance from the seating position. If you have to place the center, surround and surround back speakers closer to the seating position, adjust the delay time to make up for the difference. If either distance A or B is less than C, find the difference in the relevant table and change to the recommended setting. 5.1ch speaker connection Approximate room dimensions C L C R LS LS SW RS RS 7.1ch speaker connection L LS LS LB LB C C R SW RS RS RB RB Circle of constant primary listening distance : Actual speaker position : Ideal speaker position ABC: Primary listening distance 1 Press [3, 4, 2, 1] to select the delay time box and press [OK]. 2 Press [3, 4] to select the setting and press [OK]. L ms C dB R 0.0 0.0 Center Complete Test dB 0.0 SW dB ms dB LS 0.0 0.0 0.0 RS dB ms dB 0.0 LB 0.0 RB 0.0 Surround Surround back A Center speaker Difference B Surround/Surround back Setting speakers Approx. 34 cm (1 ft. 1 in.) 1.0 ms Difference Setting Approx. 68 cm (2 ft. 2 in.) 2.0 ms Approx. 170 cm (5 ft. 6 in.) 5.0 ms Approx. 102 cm (3 ft. 4 in.) 3.0 ms Approx. 340 cm (11 ft. 1 in.) 10.0 ms Approx. 136 cm (4 ft. 5 in.) 4.0 ms Approx. 510 cm (16 ft. 8 in.) 15.0 ms Approx. 170 cm (5 ft. 6 in.) 5.0 ms Adjusting speaker level (Effective when playing multi-channel audio) 1 Select "Test" and press [OK]. A test signal is output. Front (L) --)Center --)Front (R) --) Surround (RS) : ; Surround (LS)(- Surround back (LB) (- Surround back (RB) 2 While listening to the test signal, press [3, 4] to adjust the volume of each speaker. Center speaker: (r6 dB to s6 dB) Surround and Surround back speakers: (r10 dB to s10 dB) ≥Set each speaker level according to the volume of the Front (L) and Front (R) speaker volume respectively. 3 Press [OK]. The test signal stops. ≥No signal is output for the subwoofer. To adjust its volume, see page 26, Adjusting speaker level during play. QT9129 34 ∫ To finish the speaker setting Press [3, 4, 2, 1] to select "Complete" and press [OK]. L ms 0.0 C dB 0.0 R Center Test Surround (LS) Complete Test dB 0.0 SW dB ms dB LS 0.0 0.0 0.0 RS dB ms dB 0.0 LB 0.0 RB 0.0 Surround (RS) Surround back (RB) Surround back (LB)