Panasonic SDC615 AJSDC615 User Guide - Page 102

Chapter 7 Menu description tables 7-8-6 MIC/AUDIO2 Item/ Data storage Variable range FRONT MIC ON POWER OFF CUF REAR MIC POWER ON C U F OFF AUDIO OUT ON OFF CUF MONITOR SELECT STEREO SDC905 MIX CUF FRONT MIC LEVEL -40dB C U F -50dB REAR MIC CH1 LVL -50dB -60dB CUF REAR MIC CH2 LVL -50dB -60dB CUF REAR LINE IN LVL 0dB C U F +4dB AUDIO OUT LVL 0dB C U F +4dB HEADROOM 18dB C U F 20dB WIRELESS WARN ON OFF CUF Remarks For selecting the phantom power supply for the front microphone. For selecting the phantom power supply for the rear microphone. For setting the audio output circuit. OFF: The power to the output circuit is shut down, and the signals of the circuit are not output. ON: The signals of the audio output circuit are output. For selecting the format of the signals to be output to the monitor. For selecting the input level of the front microphone. For selecting the input level of the rear microphone. For selecting the input level of the rear microphone. For selecting the rear line input level. For selecting the rear audio output level. For setting the headroom (reference level). For selecting whether or not to output warnings when the reception of the wireless receiver is poor. 7-8-7 TC/UB Item/ Data storage TC MODE CUF UB MODE CUF VITC UB MODE CUF Variable range DF NDF USER TIME DATE EXT TCG FRM RATE REGEN USER/EXT TIME DATE TCG FRM RATE REGEN Remarks For selecting the TC mode. DF: Drop frame NDF: Non-drop frame For selecting the UB mode. USER: Selects the UB value set in the LCD section. TIME: Selects the local time (hour, minute, second). DATE: Selects the local date and time (last 2 digits of year, month, date, hour) EXT: When CAM or VIDEO is selected as the REC SIGNAL menu item setting on the screen, the user bits of the signal supplied to the TC IN connector are used as the reference. When 1394 is selected, user bits of the signal supplied to the DVCPRO connector are used as reference. If the user bits cannot be read, the user bits which are set in the unit are retained. TCG: Inputs the TCG value unchanged. FRM RATE: Selects the same camera shooting data (frame rate, etc.) as the VAUX UB (VITC UB). REGEN: Reads the value recorded on the tape and then continues to record from that value. For selecting the VAUX TC (VITC) UB mode. USER/EXT: When EXT is selected as the UB MODE setting, the value concerned applies; with any other setting, the USER value set by UB is recorded. TIME: The local time (in hours, minutes and seconds) is selected. DATE: The local date (last 2 digits of AD year, month, day and hours) is selected. TCG: The TCG value is used as is for UB. FRM RATE: The same shooting information (frame rate, etc.) of the camera as for VAUX UB (VITC UB) is selected. REGEN: The value recorded on the tape is read and recorded continuously. The underlining in the variable range column indicates the setting in the preset mode. 102