Panasonic SDC615 AJSDC615 User Guide - Page 18
Viewfinder
UPC - 791871302699
View all Panasonic SDC615 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Chapter 2 Parts and their functions 2-8 Viewfinder section = > ;7 9 : < 1 452 3 6 8 ON OFF 1 Viewfinder (optional accessory) While recording or playback is underway, pictures can be viewed through the viewfinder in black and white. The warning displays concerning the unit's operation statuses and settings, messages, zebra patterns and markers (safety zone markers and center marker) can also be seen in the viewfinder. 2 ZEBRA (zebra pattern) switch This is used to display the zebra pattern in the viewfinder. ON : The zebra pattern is displayed. OFF : The zebra pattern is not displayed. 3 TALLY switch This is used to control the front tally lamp 7. HIGH: The brightness of the front tally lamp is increased. OFF : The front tally lamp is turned off. LOW : The brightness of the front tally lamp is reduced. 4 PEAKING control This is used to adjust the outlines of the images seen inside the viewfinder to make focusing easier. Its adjustment does not affect the output signals of the camera. 5 CONTRAST control This is used to adjust the contrast of the picture seen inside the viewfinder. Its adjustment does not affect the output signals of the camera. 6 BRIGHT control This is used to adjust the brightness of the picture seen inside the viewfinder. Its adjustment does not affect the output signals of the camera. 7 Front tally lamp This lamp is activated when the TALLY switch 3 is set to the HIGH or LOW position, and it lights while the VTR unit is recording. It also flashes to provide a warning display like the REC lamp inside the viewfinder. The lamp's brightness (HIGH or LOW) when it is lighted can be selected using the TALLY switch. 8 Back tally lamp This lamp lights while the VTR unit is recording. It also flashes to provide a warning display like the REC lamp inside the viewfinder. When the lever is set to OFF, the back tally lamp is hidden. 9 Eyepiece : Diopter adjustment ring This is adjusted in line with the camera operator's diopter in such a way that the user can see the image on the viewfinder screen most clearly. ; Connecting plug < Locking ring = Microphone holder > Viewfinder stopper This is used to attach and remove the viewfinder. @ ? ? Viewfinder left-right position anchoring ring This is used to adjust the left-right position of the viewfinder. @ Viewfinder front-back position anchoring ring This is used to adjust the front-back position of the viewfinder. For details, refer to "5-2 Attaching the viewfinder and adjusting its position." 18