Panasonic SDC615 AJSDC615 User Guide - Page 8

Chapter 2 Parts and their functions 2-1 Power supply and accessory mounting section 6 57 6 2 9 8 1 43 : > = ;< 1 POWER switch This switch turns the power ON and OFF. 2 Battery mount This is for attaching the Anton Bauer battery pack. 3 DC IN (external power input) socket (XLR, 4-pin) When operating this unit using an AC power source, this socket is connected to the model AJ-B75 AC adapter (optional accessory). 4 BREAKER switch If an excessively high current flows inside the unit due to some problem or other, the circuit breaker is tripped and the power is automatically turned off to protect the unit. Push this button in after an inspection has been conducted or repairs performed inside the unit by a qualified service person. If there are no problems, the power will come back on. 5 GPS connector The connector from AJ-GPS900G, a GPS unit available as an optional accessory, is connected here. 6 Shoulder belt fittings The shoulder belt is attached here. 7 Light shoe Use this to attach the video light, etc. 8 Lens mount (bayonet type) The lens is attached to this mount. 9 Lens lever This lever is tightened to secure the lens after it has been attached to the lens mount. : Lens mount cap To remove the cap, push the lens lever 9 up. Keep the cap in place while the lens is not attached. ; Lens cable/microphone cable clamp This clamp is for anchoring the lens cable or microphone cable. < Tripod mount Mount the tripod attachment (SHAN-TM700), available as an optional accessory, when the unit is to be anchored to a tripod. = LENS jack (12-pin) The connecting cord of the lens is connected to this jack. For further details on the lenses that can be used, refer to the operating instructions of the lenses concerned. > Easy-to-adjust shoulder pad The position of the shoulder pad can be adjusted backward or forward so that the unit is balanced when it is carried on the user's shoulder. 8