Panasonic SDC615 AJSDC615 User Guide - Page 68
Mounting the unit on a tripod, 7 Adjusting the position of the, shoulder pad, Attaching
UPC - 791871302699
View all Panasonic SDC615 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Chapter 5 Preparation 5-5 Mounting the unit on a tripod Use the tripod attachment to mount the unit on a tripod. 1 Mount the tripod attachment on the tripod. Tripod attachment 5-6 Attaching the shoulder belt Shoulder belt Tripod head The tab opens when it is pressed. Take account of the center of gravity of the unit and that of the tripod attachment when selecting the attachment hole. Check that the diameter of the hole selected matches the diameter of the tripod head screw. To disengage the shoulder belt, press the tabs. Check that the shoulder belt is attached securely. 2 Mount the unit on the tripod attachment. 5-7 Adjusting the position of the shoulder pad The shoulder pad can be moved while the slide lever is held down. Its position can be adjusted in 3 mm steps (up to max. of 10 steps or 30 mm) in either the front or back direction. While holding down the slide lever, move the shoulder pad toward the front or back to the optimum shooting position. Slide the unit along the groove toward the front until it clicks into place. Detaching the unit from the tripod attachment Tripod attachment Red lever Black lever While pushing down the red lever, move the black lever in the direction of the arrow and slide the unit toward the back to remove it. If the pin of the tripod attachment fails to return to its original position after the unit has been detached, again move the black lever in the direction of the arrow while pushing down the red lever, and return the pin to its original position. Bear in mind that the unit cannot be attached if the pin remains in the center. 68 Slide lever