Panasonic SDC615 AJSDC615 User Guide - Page 41
WHITE BAL switch
UPC - 791871302699
View all Panasonic SDC615 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Chapter 4 Adjustments and settings for recording Display item What is displayed 4 Information allocated to USER buttons UM: USER MAIN U1: USER1 button U2: USER2 button REC SW Y GET ON RET SW ATW ON/OFF D.ZOOM ON/OFF 5 Filter positions 1 to 4 - 6 WHITE BAL switch A position B P T 7 Cumulative gain display 8 Gain value 9 VTR warnings, information 6:/12:/20: ¢¢dB REC WARNING SLACK E-¢¢ HUMID SERVO RF 1394 BACKUP BATT EMPTY WIRELESS-RF : AUDIO input system and level meter ; Time code display < Iris override display F W R TCG TCR (V)UBG (V)UBR CTL 12:59:59:20 12:59:59:20 AB CD EF 00 12 34 56 78 -01:59:59:20 ++ + (No display) - - - = Iris, f-value NC OPEN F1.7 to F16 CLOSE Status when display appears This appears only during MODE CHECK button operations while the USER button functions as the REC switch. This appears when the function for measuring the output brightness level (in % units for approx. 3 seconds for the area near the center marker) is ON. This appears only during MODE CHECK button operations while the USER button functions as the RET switch. This appears when ATW is operating. This indicates whether D.ZOOM is set to ON or OFF. 4 This indicates the position of the filter. This indicates that the filter has not been set to a proper position. This indicates that the WHITE BAL switch is set to channel A. This indicates that the WHITE BAL switch is set to channel B. This indicates that the WHITE BAL switch is set to PRE. This indicates that the ATW mode has not been set. It flashes when the brightness and color are outside the operating range. This indicates the value of the cumulative gain (DS.GAIN) when this gain function is working. This indicates the current gain value. This indicates that a problem has occurred during recording. This indicates that a problem has occurred in a mechanism. Depending on the nature of the trouble concerned, the power may be turned off automatically. This indicates that condensation has formed. This indicates that servo lock has not been initiated during recording or playback. This indicates that the level of the signals from the tape has dropped. This indicates that there is something wrong with the signals supplied to the DVCPRO connector. This signals that it is time to replace the backup battery. This indicates that the level of the RF signal from the wireless microphone receiver has dropped. For details on the codes displayed in this area, refer to "6-3-2 Error codes." This indicates the audio channels selected and their audio levels. This appears when the AUDIO IN switch is at the FRONT position. This appears when the AUDIO IN switch is at the WIRELESS position. This appears when the AUDIO IN switch is at the REAR position. This indicates the TCG (time code generator) value. This indicates the TCR (time code reader) value. This indicates the UBG VUBG display. This indicates the UBR VUBR display. This indicates the CTL-COUNTER value. When the iris override function is working, this indicates how much compensation is provided. ++: The aperture is opened by a full stop. +: The aperture is opened by a half stop. - -: The aperture is closed by a full stop. -: The aperture is closed by a half stop. No display: Reference status This appears when the lens cable is not connected. This appears when the lens aperture is open. This indicates the aperture value (f-value) of the lens. This appears when the lens aperture is closed. These displays appear when using a lens equipped with an aperture value display function. They flash while the aperture is being changed for the iris override. 41