Panasonic SDC615 AJSDC615 User Guide - Page 42

Chapter 4 Adjustments and settings for recording Display item What is displayed Status when display appears > Zoom display Z00 to Z99 This indicates the amount of zoom. Note that this item is not displayed even if the display setting is ON if the lens is not equipped with a zoom position return function. ? Interval, pre-rec display i (flashing) iREC (lighting) iREC (flashing) ¢¢h¢¢m/¢¢s P-REC (flashing) ¢s This appears in the INTERVAL REC mode during the times when the operation of the REC button is not acknowledged before the start of or at the end of recording. This appears during an INTERVAL REC operation. This appears during INTERVAL REC standby to indicate the wait time until the next recording. This indicates the amount of time remaining until the end of the set PRE REC time during PRE REC operation. @ ID recording display A Battery type ID PRO14 to AC-ADPT This appears when the setting to superimpose the ID onto the camera image and record the image with the ID has been established. This indicates the type of battery selected on the menu. "AC ADPT" appears when an AC adapter has been input. B Remaining battery charge/voltage ¢¢.¢V ¢¢¢% EMP MAX This indicates the remaining battery charge in 0.1V increments. This indicates the remaining digital battery charge in percent. This appears when the battery has no charge left. This appears when the battery has a full charge. C Unit's REC display REC This appears when the extender unit and 26-pin connector (BOTH) have been connected to indicate the unit's recording status using characters. It lights during recording, and it flashes while the unit's mode is transferring to recording or when a warning has been issued. D Remaining tape ¢¢¢min = END = INH Under normal conditions, "¢¢¢min" lights, and this starts flashing while the tape is reaching the end. When the tape has reached the end, "= END" lights. When recording has been inhibited, "= INH" lights. E Total length of cassette tape F Super iris ON/ super black ON ¢¢¢min S B SB This indicates the total length of the cassette tape. (This appears during a mode check.) This appears when S.IRIS has been set to ON. This appears when S.BLK has been set to ON. This indicates the color temperature during the AWB operation. G Color temperature ¢.¢K This indicates the color temperatures assigned to the A, B, and PRE positions of the WHITE BAL switch. (These may be memory values during AWB operation or menu setting values.) This indication does not appear in the ATW MODE. H Shutter speed/mode 11/¢¢.¢ 1/100 - 1/2000 SUPER V This indicates that the shutter speed is set to SYNCHRO SCAN. This indicates that a fixed shutter speed has been set. This appears when the SUPER V (mode with high vertical resolution) has been set. I D.ZOOM DZ This appears when the D.ZOOM mode has been established. 42