Panasonic SDR-H80-S Sd/hdd Camcorder - Page 29

Preparation Setup 3 Setting date and time When the unit is turned on for the first time, a message asking you to set the date and time will appear. Select [YES] and press the joystick. Perform steps 2 and 3 below to set the date and time. ¬ Rotate the mode dial to select or . 1 Select the menu. (l 26) [BASIC] # [CLOCK SET] # [YES] 2 Select the date or time, then adjust the desired value with the joystick. ∫ Changing the date format Select the menu. (l 26) [SETUP] # [DATE FORMAT] # desired display style Display style Screen display [Y/M/D] 2009.NOV.15 [M/D/Y] NOV.15.2009 [D/M/Y] 15.NOV.2009 ≥ The year will change as follows: 2000, 2001, ..., 2099, 2000, ... ≥ The 12-hour system is used to display the time. ≥ [ ] appears on the right top of the screen when [SET WORLD TIME] (l 30) is set to [HOME], while [ ] appears when it is set to [DESTINATION]. 3 Press the joystick to enter the selection. ≥ The clock function starts at [00] seconds when the joystick is pressed. 4 Press the MENU button to finish the setting. ≥ Check the date and time displayed. ≥ To set summer time, select summer time in [HOME] for [SET WORLD TIME] after setting the clock. ≥ The date and time function is driven by a builtin lithium battery. ≥ If the time display is [- -], the built-in lithium battery needs to be charged. Use the following steps to charge the battery, and then set the date and time. To recharge the built-in lithium battery Connect the AC adaptor or insert the battery to the unit, and the built-in lithium battery will be recharged. Leave the unit as it is for approx. 24 hours and the battery will save the date and time for approx. 6 months. (Even if the mode dial is set to OFF, the battery is still being recharged.) ∫ Changing the date and time display mode Select the menu. (l 26) [SETUP] # [DATE/TIME] # desired display style [DATE] [D/T] [OFF] NOV.15.2009 NOV.15.2009 12:34 PM 29 LSQT1449