Panasonic SDR-H80-S Sd/hdd Camcorder - Page 53

Manual shutter speed, aperture adjustment, Select the manual mode., Select, with the, joystick.

Page 53 highlights

Manual shutter speed/ aperture adjustment Shutter Speed: Adjust it when recording fast-moving subjects. Aperture: Adjust it when the screen is too bright or too dark. 1 Select the manual mode. (l 50) 2 Select [ ] or [ ] with the joystick. MNL 4/4 NEXT 3 Adjust the settings with the joystick. MNL  1/100  OPEN BACK A Shutter speed: 1/60 to 1/8000 1/60 to 1/500 ≥ The shutter speed closer to 1/8000 is faster. ≥ If [AUTO SLW SHTR] is set to [ON], the slowest shutter speed is 1/30. B Iris/Gain value: CLOSE # (F16 to F2.2) # OPEN # (0dB to 18dB) ≥ Value closer to [CLOSE] darkens the image. ≥ Value closer to [18dB] brightens the image. ≥ When the iris value is adjusted to brighter than [OPEN], it changes to the gain value. To restore to automatic adjustment Press the iA button. ≥ When setting both the shutter speed and the iris/gain value, set the shutter speed and then set the iris/gain value. ∫ Manual shutter speed adjustment ≥ Avoid recording under fluorescent light, mercury light or sodium light because the color and brightness of the playback image may change. ≥ If you increase the shutter speed manually, the noise on the screen may increase. ≥ You may see vertical lines of light in the playback image of a brightly shining subject or highly reflective subject, but this is not a malfunction. ≥ During normal playback, image movement may not look smooth. ≥ When recording in an extremely bright place, the screen may change color or flicker. If so adjust the shutter speed manually to [1/60] or [1/100]. ∫ Manual iris/gain adjustment ≥ If the gain value is increased, the noise on the screen increases. ≥ Depending on the zoom magnification, there are iris values that are not displayed. 53 LSQT1449

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124

53
LSQT1449
Shutter Speed:
Adjust it when recording fast-moving subjects.
Aperture:
Adjust it when the screen is too bright or too
dark.
1
Select the manual mode. (
l
50)
2
Select [
] or [
] with the
joystick.
3
Adjust the settings with the
joystick.
A
Shutter speed:
1/60 to 1/8000
1/60 to 1/500
The shutter speed closer to 1/8000 is faster.
If [AUTO SLW SHTR] is set to [ON], the
slowest shutter speed is 1/30.
B
Iris/Gain value:
CLOSE
#
(F16 to F2.2)
#
OPEN
#
(0dB to 18dB)
Value closer to [CLOSE] darkens the image.
Value closer to [18dB] brightens the image.
When the iris value is adjusted to brighter than
[OPEN], it changes to the gain value.
To restore to automatic adjustment
Press the iA button.
When setting both the shutter speed and the
iris/gain value, set the shutter speed and then
set the iris/gain value.
Manual shutter speed adjustment
Avoid recording under fluorescent light,
mercury light or sodium light because the color
and brightness of the playback image may
change.
If you increase the shutter speed manually, the
noise on the screen may increase.
You may see vertical lines of light in the
playback image of a brightly shining subject or
highly reflective subject, but this is not a
malfunction.
During normal playback, image movement
may not look smooth.
When recording in an extremely bright place,
the screen may change color or flicker. If so
adjust the shutter speed manually to [1/60] or
[1/100].
Manual iris/gain adjustment
If the gain value is increased, the noise on the
screen increases.
Depending on the zoom magnification, there
are iris values that are not displayed.
Manual shutter speed/
aperture adjustment
MNL
4/4
4/4
NEXT
NEXT
4/4
NEXT
OPEN
OPEN
1
/
100
100
1
/
100
OPEN
MNL
BACK
BACK
BACK