Panasonic SDR-H80-S Sd/hdd Camcorder - Page 40

To use the zoom microphone function The zoom microphone is linked to the zooming operation so that far-away sounds with a teleshot and close-up sounds with a wide-angle shot are recorded more clearly. ¬ Rotate the mode dial to select . Select the menu. (l 26) [ADVANCED] # [ZOOM MIC] # [ON] Recording yourself ¬ Rotate the mode dial to select or . Rotate the LCD monitor towards the lens side. Quick start This unit will resume recording/pause mode about 0.8 seconds after the LCD monitor is reopened. ≥ When in Quick start standby mode about 60% of the power used in recording pause mode is being consumed, so the recording time will be reduced. ¬ Rotate the mode dial to select or . 1 Select the menu. (l 26) [SETUP] # [QUICK START] # [ON] 2 Close the LCD monitor while the mode dial is set to or . The status indicator A flashes green and the unit goes into quick start standby mode.  ≥ The image is horizontally flipped as if you see a mirror image. (However the image recorded is the same as a normal recording.) ≥ When the LCD monitor is rotated towards the lens side, the icon will not be displayed even if you press the joystick. ≥ Only some indications will appear on the screen. When [°] appears, return the direction of the LCD monitor to normal position and check the warning/alarm indication. (l 98) 3 Open the LCD monitor. The status indicator A lights red and the unit is put into recording pause approx. 0.8 seconds after it is turned on.  To cancel Quick start Select [SETUP] # [QUICK START] # [OFF] ≥ The default setting is on. ≥ Quick start standby mode is canceled if jabout 5 minutes elapsed jthe mode dial is switched jthe battery is removed or the AC adaptor is disconnected 40 LSQT1449