Pfaff creative 2124 Owner's Manual - Page 26
Winding the bobbin from the spool pin, Threading
View all Pfaff creative 2124 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Bobbin winding Winding the bobbin from the spool pin Place the sewing thread on the spool pin. Slide a spool cap, slightly larger than the spool, firmly against the spool. Three different spools caps to accomodate any type of thread spool are included with your machine. Choose a spool C cap that is the same size or slightly larger in diameter than the spool. Threading Place the thread into guide A from the front and pull it counter clockwise around the pre- tension device B. Make sure the thread is pulled securely inside the pre-tension device for cor- B rect thread tension. Pull the thread under the A thread guide C (from back to front). Wind the thread tail around the bobbin several times in a clockwise direction. Turn on the machine. Hold the end of the thread firmly and press the foot control. As soon as the bobbin is full, the winding action will stop automatically. Push the bobbin to the left, cut the thread and remove bobbin from the winder. Note: If you want to wind a bobbin before you start to embroider, you need to choose a design and a hoop in order to be able to wind your bobbin. 2:8