Pfaff creative 2124 Owner's Manual - Page 30
Threading your creative 2124
View all Pfaff creative 2124 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Threading your creative 2124 Switch off the main switch. Raise the presser foot lifter. Place the thread on the spool pin and fit a spool cap either the same size or slightly larger. Using both hands, pull the thread into thread guide A from the front. Place the thread from right to left into the pretension guide B. B A Now pass it through the left threading slot downwards through the right-hand side of the tension disk. Pull the thread around the stop C and into the right threading slot and upwards to the take-up lever. The thread must be pulled into the take-up lever from left to right. Pass the thread downwards in the right-hand threading slot. Pull the thread from the side behind one of the two thread guides D. C D 2:12
A
B
C
D
2:12
Threading your creative 2124
Switch off the main switch.
Raise the presser foot lifter. Place the thread on
the spool pin and fit a spool cap either the same
size or slightly larger.
Using both hands, pull the thread into thread
guide A from the front. Place the thread from
right to left into the pretension guide B.
Now pass it through the left threading slot
downwards through the right-hand side of the
tension disk. Pull the thread around the stop C
and into the right threading slot and upwards
to the take-up lever. The thread must be pulled
into the take-up lever from left to right. Pass the
thread downwards in the right-hand threading
slot.
Pull the thread from the side behind one of the
two thread guides D.