Pfaff creative 2124 Owner's Manual - Page 27
Winding a bobbin through the needle
View all Pfaff creative 2124 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Preparations Winding a bobbin through the needle It is possible to wind bobbins even when the machine is fully threaded. Raise the presser foot lifter to the top position. Pull the needle thread underneath the presser foot and upward through the right-hand threader slot. Place the thread from left to right through the take-up lever D. Note: The take-up lever must be at its highest position. D Guide the thread to the right under thread guide C. Place an empty blue bobbin on the bobbin winder aligning the small rectangular hole on the bottom side of the bobbin with the small pin on the bobbin winder, making sure that the C Pfaff logo is facing up. Wrap the thread tail clockwise around the bobbin. Push the bobbin-winding lever to the right. Hold the end of the thread tail firmly and press the foot control. As soon the bobbin is full, the winding action will be stopped automatically. Push the bobbin to the left, cut the thread and remove the bobbin from the winder. 2:9