Pfaff creative 2124 Owner's Manual - Page 51

Embroidery Get started to embroider 1. Attach the embroidery foot and thread the machine. 2. Attach the embroidery unit and put the presser foot in the up position. Turn on your machine. 3. The machine prompts you to press the hoop selection button so that the machine can calibrate. 4. Insert your embroidery creative smart card and choose a design. The design number will be shown in the window. The machine will choose the smallest hoop for that design. Attach the hoop with the hooped fabric to the embroidery unit. If the hoop on the window does not match the hoop you have inserted, your machine will not embroider. Touch the hoop selection button to change the hoop. 5. Thread your machine with color no. 1. (Check your embroidery booklet for more info on the colors). 6. Press the reverse sewing button for a a few seconds to start your embroidery. The machine will now start to test the hoop and then tell you to place the presser foot in darning position. Lower the presser foot lifter slowly and push it to the rear until it engages in the darning position. When the presser foot is in the darning position press the reverse button again and the machine will begin to sew. After a few stitches the machine will stop in order for you to cut the thread tail. The cut symbol will flash on your window. Cut the thread and press the reverse button to continue embroidering. 7. When the machine has sewn the first color it will stop and the no. 2 will flash. Change the top thread to no. 2 and continue to embroider. Repeat this for all the colors. 8. When you have finished the last color the machine will return to the beginning of the design and color no. 1, will be flashing in the window. Remove the hoop from the embroidery unit and cut the thread ends. 9. Press the parking position button and turn off the machine. Put the embroidery arm in the packing position and remove the embroidery unit. 3:15