Pfaff creative 2124 Owner's Manual - Page 56
Appliqué embroidery, Cutwork embroidery
View all Pfaff creative 2124 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Appliqué embroidery All appliqué embroideries are marked with an A in Pfaff creative cards/cds design booklets. To embroider an appliqué design, place a stabilizer underneath the fabric and hoop all the layers. Start to embroider. A straight stitch outline is stitched around the appliqué design. When the machine stops and you see an A in the display, place the appliqué fabric on top. A Start your machine again, and the machine will sew a straight stitch outline around the appliqué section of the design. When the machine stops the second time, slide off the hoop but do not take the fabric out of the hoop. Carefully trim around only the appliqué fabric outside the straight stitch line. Slide the hoop back onto the embroidery unit and continue embroidering to finish the appliqué edges and the entire embroidery. Cutwork embroidery All cutwork embroideries are marked with an A in Pfaff creative cards/cds design booklets. To embroider cutwork designs, place a stabilizer underneath the fabric and hoop all layers. Start embroidering. A straight stitch outline is stitched around the cutwork design. When the machine stops and an A is shown in the display, remove the hoop but do not take the fabric out of the hoop. Carefully cut away the fabric from inside the straight stitch outline making sure you do not cut away the stabilizer. To finish, slide the hoop back onto the embroidery unit and continue embroidering. 3:20